Class B
For all who RV in a Class B.
54 topics in this forum
-
- 5 replies
- 350 views
-
- 31 replies
- 3.2k views
-
- 0 replies
- 180 views
-
- 2 replies
- 333 views
-
- 8 replies
- 523 views
-
- 4 replies
- 804 views
-
- 3 replies
- 896 views
-
- 1 reply
- 1.3k views
-
- 2 replies
- 699 views
-
- 22 replies
- 21.1k views
-
- 13 replies
- 10.7k views
-
- 3 replies
- 898 views
-
- 3 replies
- 2.4k views
-
- 6 replies
- 3.6k views
-
- 11 replies
- 1.3k views
-
- 1 reply
- 1.2k views
-
- 8 replies
- 11.6k views
-
- 1 reply
- 2.2k views
-
- 13 replies
- 2.4k views
-
- 3 replies
- 2.2k views
-
- 8 replies
- 2.6k views
-
- 4 replies
- 3.6k views
-
- 17 replies
- 2.6k views
-
- 10 replies
- 2.3k views
-
- 13 replies
- 5.2k views
-
Topics
-
-
Posts
-
Yesterday I tried to start the truck. It was about 45 degrees outside so I tried it. Not turning over fast enough. So I plugged it in to the block heater. And then then checked the batteries voltage, 11.9 volts. Not good. The truck sits plugged into the 5thwheel by an umbilical cord. I did not want to check to see if the umbilical cord power was good. I know it would not take long. But I did want to put new spark plugs in the generator on the truck. So with new plugs in the generator I started the generator and plugged in the on board converter. About 20 minutes later the truck started. So this am I will check the batteries for voltage. Now it maybe 6or7 years since there were new batteries installed in this truck. So I am shopping for batteries. I also will see if the inline fuse for the umbilical cord is good. But batteries would be a good thing to do, I do believe -
I like it too. But in my 70's do I really want to be staining or painting my house? Think this is biggest concern. I really like the simplicity of the modular block build though. -
-
I like it. The true cost ??? when you tie everything down for for Hurricanes, Winds and Earth quakes. I had a house built with ICF (insulated Concrete Forms). It was the ICF construction from the basement footer to the roof truss. I was quiet and efficient heating and cooling. I was not quiet for an earth quakes in Southern Illinois. Would I do it again, yes in part. Definitely the basement but maybe only half the walls for the main level. Wood is less forgiving than concrete if you want to make a change. With the price of oil going up, the ICF blocks may not be affordable and wood products should be more stable in price. Clay
-
By Jim & Wilma · Posted
My guess is you have a poor connection upstream of those fuses limiting the voltage/current when F2 load is applied. However, if your windows are working normal with F2 pulled, makes me doubt my guess. What is F2 size & load? With F2 pulled, I’d measure the voltage at the fuse block when you operate the windows. If it drops significantly, it strengthens my guess. Good luck!
-
