General RV Information
General discussion forum for RVers.
3,559 topics in this forum
-
- 0 replies
- 726 views
-
- 15 replies
- 323 views
-
- 12 replies
- 350 views
-
- 0 replies
- 82 views
-
- 8 replies
- 153 views
-
- 2 replies
- 101 views
-
- 23 replies
- 478 views
-
- 13 replies
- 172 views
-
- 5 replies
- 195 views
-
- 16 replies
- 292 views
-
- 4 replies
- 172 views
-
- 3 replies
- 129 views
-
- 3 replies
- 204 views
-
- 2 replies
- 243 views
-
- 45 replies
- 10k views
-
- 3 replies
- 279 views
-
- 10 replies
- 653 views
-
- 4 replies
- 134 views
-
- 6 replies
- 210 views
-
- 8 replies
- 253 views
-
- 4 replies
- 161 views
-
- 22 replies
- 523 views
-
- 33 replies
- 4k views
-
- 27 replies
- 2.4k views
-
- 5 replies
- 252 views
-
Topics
-
-
Posts
-
By Parrformance · Posted
This the bulletin I found. -
By Parrformance · Posted
This is the part number for the 2006 Volvo with Ultrashift. -
By Parrformance · Posted
Just finished it up today👍🏽 I’ll preface it by saying I chose to clean and dialectic all the connections at the transmission. Once I pulled a couple of connectors apart only to find pristine contact points, I decided to pull the plug out of the top port of the tail shaft. I noticed a LOT of powdered rust and debris came out with the plug. This prompted me to pull the lower plug as well. Rusty powder poured out like water, the tone ring inside however was shiny clean. I was hopeful this was the cause of the surging, but I chose to reach out to Nextran the local Volvo dealer to see if they had a new sensor in stock. Mike said we have 1, quoted $47 so I put everything back together enough to drive the truck over to get it. The cruise was somewhat better on the way over but not perfect. I took the tools I needed and had the port cleaned and prepared with anti-seize so I could slide under and install the new sensor as soon as I had it in hand. The drive home was exceptionally pleasant, the sensor corrected the surging cruise control completely, and improved the shifting of the truck. The shifts are smoother, and seem to be at the appropriate timing. With your advice Suite, I am planning on leaving the old sensor as a plug, Thanks for the advice, this made the job quick and painless. -
By Larry Burkett · Posted
I emailed him like said he wanted us, Good Sam members, to do and got a lady that did absolutely nothing to help the situation that we went thru, but did get me a check for $75 for my inconvenience. The next day I got my renewal notice from them. That was the last I heard from them. The next day I signed with Coach Net and have been totally happy with the service with them. And you talk to a person from Dallas Tx instead of a person who hardly speaks English from a foreign country. -
That is a rare piece. I've never seen a 318 with O-2 sensor and a carburetor.
-
