Ronbo Posted February 1, 2020 Report Share Posted February 1, 2020 So I bought a BlueFire device that plugs into the diagnostic port. I also bought a Y cable so my trailer brake would still work. You download a program for your dashboard. I really like it. I was able to improve my mpg by monitoring my load and torque. It also tracks my fuel used. I could have made it from Reno to Albuquerque on one tank with some left over but wanted to fill up in hollbrook at the maverick. They have rv pumps at the truck island and it is a little cheaper. Arizona finally decide that we could fill up at rv pumps without penalty. Here is a screenshot of my dashboard. Quote Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
chief916 Posted February 1, 2020 Report Share Posted February 1, 2020 Ronbo...tell us more. Where did you get and how much. Any negative input as well. Thx Quote Link to comment Share on other sites More sharing options...
dan412 Posted February 1, 2020 Report Share Posted February 1, 2020 I just ordered one on Amazon for my year truck 2011 $190.00 the App is free. Quote 2011 Volvo D13 485/1750 Eaton 13 Speed 2016 Montana 3820FK Link to comment Share on other sites More sharing options...
Ronbo Posted February 1, 2020 Author Report Share Posted February 1, 2020 I have no negative input. I did have to figure out how to manipulate the gauges. Once you do it is easy. They have a forum and will answer questions pretty quick. The map is more of a placeholder right now. It doesn’t track your position. They have several different devices depending on your operating system and how many pins your connector has. Available on amazon. Quote Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
Jack Mayer Posted February 1, 2020 Report Share Posted February 1, 2020 I'll be interested to get feedback on its use in a Volvo. How does it compare to the Silverleaf offering? Anyone have an opinion? Quote Jack & Danielle Mayer #60376 Lifetime Member Living on the road since 2000PLEASE no PM's. Email me. jackdanmayer AT gmail 2016 DRV Houston 44' 5er (we still have it) 2022 New Horizons 43' 5er 2016 Itasca 27N 28' motorhome 2019 Volvo 860, D13 455/1850, 236" wb, I-Shift, battery-based APU No truck at the moment - we use one of our demo units 2016 smart Passion, piggyback on the truck -------------------------------------------------------------------------See our website for info on New Horizons 5th wheels, HDTs as tow vehicles, communications on the road, and use of solar powerwww.jackdanmayer.com Principal in RVH Lifestyles. RVH-Lifestyles.com Link to comment Share on other sites More sharing options...
dan412 Posted February 2, 2020 Report Share Posted February 2, 2020 19 hours ago, Jack Mayer said: I'll be interested to get feedback on its use in a Volvo. How does it compare to the Silverleaf offering? Anyone have an opinion? Mine should be here today I'm going to try it out on my Volvo today when it gets here. Then on Monday take it to work and try it on both work trucks 2015 Pete and 2018 Kenworth. I will let you know. Quote 2011 Volvo D13 485/1750 Eaton 13 Speed 2016 Montana 3820FK Link to comment Share on other sites More sharing options...
SuiteSuccess Posted February 3, 2020 Report Share Posted February 3, 2020 Ronbo, My Volvo has a basic gauge package. I don’t have turbo pressure and some of the other parameters displayed. Will the diagnostic port still display them on the Bluefire? Do all trucks come with sensors to monitor oil temp, turbo pressure, etc. but not necessarily connected to a display gauge on the dash? Quote 2006 Volvo 780 "Hoss" Volvo D12, 465hp, 1650 ft/lbs tq., ultrashift Bed Build by "JW Morgan's Custom Welding" 2017 DRV 39DBRS3 2013 Smart Passion Coupe "Itty Bitty" "Don't go around saying the world owes you a living. The world owes you nothing. It was here first!" Link to comment Share on other sites More sharing options...
Ronbo Posted February 3, 2020 Author Report Share Posted February 3, 2020 Once you get it hooked up, go to repair. It will show you everything it can monitor. There are lots that the computer monitors that we don’t have gauges for. I doubt if anyone has a load or torque gauge. To get a dashboard, it is probably best to download one and then modify it to fit your needs. I don’t need to monitor every little detail. I still have work to do. I took screen shots of the repair page so I can make changes that will work. Quote Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
DesertMiner Posted February 3, 2020 Report Share Posted February 3, 2020 (edited) This can also monitor most of the same parameters including load and HP ScanGauge D Edited February 3, 2020 by DesertMiner Quote Link to comment Share on other sites More sharing options...
GeorgiaHybrid Posted February 4, 2020 Report Share Posted February 4, 2020 10 hours ago, SuiteSuccess said: Ronbo, My Volvo has a basic gauge package. I don’t have turbo pressure and some of the other parameters displayed. Will the diagnostic port still display them on the Bluefire? Do all trucks come with sensors to monitor oil temp, turbo pressure, etc. but not necessarily connected to a display gauge on the dash? My KW has all of that and more on the dash. I think you got the wrong truck Carl... 😎😁😁😁😁 Quote 2017 Kenworth T6802015 DRV 38RSSA Elite Suites2016 Smart Prime Link to comment Share on other sites More sharing options...
SuiteSuccess Posted February 4, 2020 Report Share Posted February 4, 2020 9 hours ago, GeorgiaHybrid said: My KW has all of that and more on the dash. I think you got the wrong truck Carl... 😎😁😁😁😁 Geez, already back and sassing.😆 Quote 2006 Volvo 780 "Hoss" Volvo D12, 465hp, 1650 ft/lbs tq., ultrashift Bed Build by "JW Morgan's Custom Welding" 2017 DRV 39DBRS3 2013 Smart Passion Coupe "Itty Bitty" "Don't go around saying the world owes you a living. The world owes you nothing. It was here first!" Link to comment Share on other sites More sharing options...
Cotreker Posted February 5, 2020 Report Share Posted February 5, 2020 Here is another unit that displays similar outputs found on Letstruck website. Kevin Rutherford has a truck talk show on XM that is really good on Friday's. $197; I want a method to view my boost and few other gauges. If you cannot measure it you can not improve it. https://letstruck.com/collections/scangaugekr Quote Volvo 670 / 2006 10-Speed ATV's & Sleds 2017 Host Mammoth Slide-In Camper on Deck Jackalopee Build article published here Link to comment Share on other sites More sharing options...
Cotreker Posted February 5, 2020 Report Share Posted February 5, 2020 For those that want to listen he is also a health expert so now my wife listens to him. Road Dog Trucking Radio - channel 146 Quote Volvo 670 / 2006 10-Speed ATV's & Sleds 2017 Host Mammoth Slide-In Camper on Deck Jackalopee Build article published here Link to comment Share on other sites More sharing options...
Ronbo Posted February 5, 2020 Author Report Share Posted February 5, 2020 I have a scan gauge for my Jeep. The problem is that you are limited to only 4 gauges at a time. Quote Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
spindrift Posted February 7, 2020 Report Share Posted February 7, 2020 BlueFire is also compatible with Windows 10, I believe Quote 2012 F350 KR CC DRW w/ some stuff 2019 Arctic Fox 32-5MCindy and Tom, Kasey and Maggie (our Newfie and Berner) Oh...I forgot the five kids. Link to comment Share on other sites More sharing options...
Ronbo Posted February 7, 2020 Author Report Share Posted February 7, 2020 Yes. iOS, Android and windows 10. You need to buy the proper device. One is comparable with all three but others are not. You also need to have the correct plug. If you nerd a Y cord, it needs to match the color of your plug. A green cord wont plug into a grey connector. I found out the hard way. Quote Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
dan412 Posted February 8, 2020 Report Share Posted February 8, 2020 I plugged into the Volvo there is a lot of info available that I don't have on the factory dash cluster. You can clear codes. I plugged in to my work 2015 Pete that had a ABS code showed left wheel sensor and which axle it was. I like that you can set up the gages sitting in your easy chair. I would recommend using a tablet so it's easy to see. Quote 2011 Volvo D13 485/1750 Eaton 13 Speed 2016 Montana 3820FK Link to comment Share on other sites More sharing options...
Jack Mayer Posted February 10, 2020 Report Share Posted February 10, 2020 On 2/8/2020 at 7:18 AM, dan412 said: I plugged into the Volvo there is a lot of info available that I don't have on the factory dash cluster. You can clear codes. I plugged in to my work 2015 Pete that had a ABS code showed left wheel sensor and which axle it was. I like that you can set up the gages sitting in your easy chair. I would recommend using a tablet so it's easy to see. Which model do you have? Got an Amazon link? Thanks for the report. Quote Jack & Danielle Mayer #60376 Lifetime Member Living on the road since 2000PLEASE no PM's. Email me. jackdanmayer AT gmail 2016 DRV Houston 44' 5er (we still have it) 2022 New Horizons 43' 5er 2016 Itasca 27N 28' motorhome 2019 Volvo 860, D13 455/1850, 236" wb, I-Shift, battery-based APU No truck at the moment - we use one of our demo units 2016 smart Passion, piggyback on the truck -------------------------------------------------------------------------See our website for info on New Horizons 5th wheels, HDTs as tow vehicles, communications on the road, and use of solar powerwww.jackdanmayer.com Principal in RVH Lifestyles. RVH-Lifestyles.com Link to comment Share on other sites More sharing options...
Ronbo Posted February 10, 2020 Author Report Share Posted February 10, 2020 Review the device. There are several models. Since my truck has a 6 and a 9 plug port I purchased the 9 plug model in green that uses IOS, Android and Windows 10. I needed a Y cable and since my port is black I had to use a black Y. The green will work on a black port but the black won’t work on a green port. There is 1 pin on the green that is larger. This makes me compatible with all 9 pin ports. I can even use another cable to mate it to the 6 pin. It is very adaptable. Just make sure you have the correct combination. It works great on the Y with another device such as a Tucson brake controller. Quote Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
Ronbo Posted February 10, 2020 Author Report Share Posted February 10, 2020 Jack this is the one you need. You can turn of the Slower data stream you don’t need. https://www.amazon.com/gp/product/B01CS1HUXI/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 Quote Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
Jack Mayer Posted February 11, 2020 Report Share Posted February 11, 2020 What about the 16-pin ports?? Quote Jack & Danielle Mayer #60376 Lifetime Member Living on the road since 2000PLEASE no PM's. Email me. jackdanmayer AT gmail 2016 DRV Houston 44' 5er (we still have it) 2022 New Horizons 43' 5er 2016 Itasca 27N 28' motorhome 2019 Volvo 860, D13 455/1850, 236" wb, I-Shift, battery-based APU No truck at the moment - we use one of our demo units 2016 smart Passion, piggyback on the truck -------------------------------------------------------------------------See our website for info on New Horizons 5th wheels, HDTs as tow vehicles, communications on the road, and use of solar powerwww.jackdanmayer.com Principal in RVH Lifestyles. RVH-Lifestyles.com Link to comment Share on other sites More sharing options...
Brad NSW Posted February 11, 2020 Report Share Posted February 11, 2020 Thanks Ronbo. Mine came in yesterday. I also ordered the Y connector. Unplugged my Tucson controller, plugged the Y connector back in, then the BlueFire. Turned the key on an low and behold, all the gauges I wanted were displayed. I put in a few aftermarket gauges on my 1 ton and missed having them on the HDT, especially the boost and EGTs. Now I've got those and more! Should make troubleshooting and diagnostics much easier. Pretty useful and easy mod. Still have to figure out how to stop the screen on the Samsung tablet I'm using as a display from going blank. Longest It appears I can set the screensaver from popping up is 30mins. Anyone know how to keep the display on indefinitely??? Quote 2010 Freightliner, DD15 Eaton Ultrashift, 2015 New Horizons 5th Wheel. Occupants - Dena/Brad/Hershey BLOG LINK Link to comment Share on other sites More sharing options...
Ray,IN Posted February 11, 2020 Report Share Posted February 11, 2020 (edited) 5 hours ago, Jack Mayer said: Which model do you have? Got an Amazon link? Thanks for the report. There are many threads about the bluefire here. Amazon bluefire. Most owners use a tablet. Some are negative, most are positive. One thread dives into the technical side. Edited February 11, 2020 by Ray,IN Quote 2000 Winnebago Ultimate Freedom USQ40JD, ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG retired;Good Sam Life member,FMCA ." And so, my fellow Americans: ask not what your country can do for you--ask what you can do for your country. John F. Kennedy 20 Jan 1961 Link to comment Share on other sites More sharing options...
hatrack Posted February 11, 2020 Report Share Posted February 11, 2020 22 minutes ago, Jack Mayer said: What about the 16-pin ports?? Jack, I think this is what we would need The first link is bluefire and the second is the actual cable for sale. I would also need a splitter for the tucson brake controller. Still haven't found that. https://bluefire-llc.com/store/en/volvo-obd-ii-to-deutsch-9-pin-cable http://obd2allinone.com/products/volvoj1939.asp Ken.... Quote 2017 DRV Fullhouse JX450 2020 Volvo VNR 42-640, D13, 455hp, Ishift, 189"wb, factory single, ET Junior Hitch @ 195", Jacklopee, Directlink 2016 GMC 3500 Denali DRW, CC, LB, Curt 25k, Sold Link to comment Share on other sites More sharing options...
rdickinson Posted February 11, 2020 Report Share Posted February 11, 2020 1 hour ago, hatrack said: Jack, I think this is what we would need The first link is bluefire and the second is the actual cable for sale. I would also need a splitter for the tucson brake controller. Still haven't found that. https://bluefire-llc.com/store/en/volvo-obd-ii-to-deutsch-9-pin-cable http://obd2allinone.com/products/volvoj1939.asp Ken.... Call Tucson and ask them, they've always been helpful to me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.