hatrack

From this web site: https://rhondajones.top/ Ford Trailer Plug Wiring Diagram - People today comprehend that trailer is a vehicle comprised of very complicated mechanisms. This automobile is designed not just to travel 1 location to another but also to carry heavy loads. This article will be discussing ford trailer plug wiring diagram. Which are the benefits of understanding these knowledge? You will be surprised to understand it.

This is from Volvo wiring diagram.. Ken....

Installed Windows 11 this morning on my dual boot system that runs Windows Preview on a separate partition. Don't really care for the new layout of the Start Menu or the way the Taskbar is setup now. Ken....

Glen, lockmeup68 use to stay at this campground. He may be able to tell you more about the campground and area. Ken....

I have the mid roof VNR 42 640 ans a DRV Fullhouse that is 13'6" and the 5th wheel is about a foot higher than the truck. Truck at back of sleeper is a little over 11" the 740 is taller. Ken.... https://drive.google.com/file/d/1Eg90KFyW0mgdKa3QOXfgDoiIWm4E7FvB/view?usp=sharing https://drive.google.com/file/d/1x4VcKrbAUmgoEkDW0IU_XqwYpbQByPnM/view?usp=sharing

Rich, I made a error mine is actually 49.5" to the top, but my frame is only 10.5" not 12" like most of your trucks. 20" center of axle 8" to bottom of frame 10.5" frame et junior 11.71" to top. I'm thinking about moving mine back 9" and dropping 2.25" and put rvh hitch pin on trailer and dropping 8" in length of truck and trailer.

deer run

ET Junior mounted 3/4" below top of frame. With a ride height of 50 1/4". I raised the hitch pin to highest position on the DRV Fullhouse. Had to use 4" X 8" x 3/8" angle with a notch cut for the torque bar bracket and had to cut a coupe of notches for bolts down the side. If you want to take a look at the mounting stop by Crossvile, Spring Lake RV Resort. We'll be here until about June. https://drive.google.com/file/d/1VNitcWr7Dl7gdiD0I72UHIWSf1VYfdSt/view?usp=sharing

Thank you Carl....

Carl, Would you mind sharing the shop name? I want to get my DROM and tool boxes doe. Thanks, Ken....

I made an Excel sheet based on info from a pdf files on weight formulas. It is on google drive and shared. There's a couple other files there fo trailer and truck weight. File https://drive.google.com/file/d/1yU8vJIOSqEYSThWmyhdEvo6wcOLo_4et/view?usp=sharing Drive https://drive.google.com/drive/folders/1XH6hCjmh-MdMjrwh4mFz0OcHKCkkp_Xe?usp=sharing Maybe this will help, Ken....

Thanks everyone. I'll start looking for leak when the weather gets better. It will hold air a couple days. Thank Rick you're also. Ken....

I think that the rear suspension leveling valve on my truck is bad. When I drop the rear and turn the key off the rear raises backup and now it is loosing all the air in a couple days and the rear bags go flat. Is this caused by the leveling valve or maybe a leak. What do you experienced guys think it is? I haven't done anything on the truck but wiring for the jacklopee and the taillights. Limited knowledge on the mechanics of the air system. Thanks, Ken....

See if this is what you want. I have a couple pdf's of floor plans and paint pattern if you need them. https://drive.google.com/file/d/1UsyfgzRksNg-D_OFH_8wS5lFG2Yr3T86/view?usp=sharing Ken....

Dan, check this site for just transporting not carrying. Quote from site: Federal law does not restrict individuals from transporting legally acquired firearms across state lines for lawful purposes except those explicitly prohibited by federal law to include convicted felons; persons under indictment for felonies; adjudicated “mental defectives” or those who have been involuntarily committed to mental institutions; illegal drug users; illegal aliens and most non-immigrant aliens; dishonorably discharged veterans; those who have renounced their U.S. citizenship; fugitives from justice; persons convicted of misdemeanor crimes of domestic violence; and persons subject to certain domestic violence restraining orders. Therefore, no federal permit is required (or available) for the interstate transportation of firearms. https://www.nraila.org/articles/20150101/guide-to-the-interstate-transportation

I would guess that you have to tether the phone to the router and than connect to the wifi with the computer and the phone. I was reading the link you provide for the router and I'm pretty sure that this is how to do it.

Sculptor, The UPS Brown Store will forward you're mail for a fee. We have ours forwarded about once a month or if we are in the area we pick it up at the store. They charge between $10.00 - $30.00 if we have a lot of prescriptions with the mail. Ken....

Sculptor, TN has no income tax so unless you are running a business or have a very big income from 401k you should not have to file a TN tax return. I believe TN doesn't tax 401k income until I believe @ $300,000.00 of withdrawal. We do our Federal taxes with no problems. We got random audited a couple years ago and IRS didn't say anything about address. The only problem we had was last year with Williamson County on plates. We go back in November. Going to try and go to a different teller this year. Ken....

I built a spreadsheet to do the math if you put in the numbers from the scale ticket. Some of you guys that know the number better may want to check the formula's as this is the first time I did this. The link below goes to the shared google drive where the file is stored. I also have on there that I have been playing with to figure hitch position and total length. Truck and Trailer Weight

bob, I don't know if it is similiar to the directlink but with the directlink you have to touch the brake to activate it. I almost sent mine back because before I call them and they told me the brake has to wired and touched. Ken....

Bob, I think there are two screws by the cup holder that pops out. Not positive on this, still trying to figure out how to open it on my Volvo VNR 640.

I run Co Pilot RV on an iPad and the truck has Tom Tom Truck built into the dash. Both have the ability to enter your length, Height, and etc...

Sculptor, I'm using a UPS Brown Store in TN, however last November when I renewed my truck and trailer in Williams County they didn't want to renew without a real house address. The lady did agreed to do it if I paid cash but told me she would talk to her boss on Monday and they may call me and cancel the registration. They never called but in November I have to do it again. TN really doesn't allow PMD's as an address but several of us have gotten away with it for awhile, @ 4 years for us. The wife renewed her licenses in Crossville last June and they made her do a new application for renewal and sent it to Nashville for approval. They did approve it. When you transfer from NC to TN they may require you to have 2 proofs of address it is in there law they will accept insurance invoice, electric bill. phone bill or other utilities. I use to have a copy of the rule, I'll see if I can find it. found it https://www.tn.gov/revenue/title-and-registration/vehicle-titling---registration/vehicle-titling/titling-a-vehicle--new-residents-or-those-relocating-to-tennessee-.html Hope this help, Ken....

This is for the new VNL and I believe it is the same for the gen 2 volvo's. This is only part of the spec you want but may help. https://www.volvotrucks.us/trucks/vnl/specifications/

Glen, I use mine as a daily driver, we have put 25,000 on it since last May and about 16,000 has been as a daily driver groceries, food and anything else we need to do. We have a 2020 Volvo VNR 640, single with 189" wheelbase and it is just a little too big for a single space but not much longer then a F450 the frame behind the cab is @ 10' long . It is our only truck. When we are hooked up we are @64.5' long with a DRV Fullhouse Toyhauler and the hitch is 6" behind the rear axle. Hope this helps, Ken....