Jump to content

I'mdonewiththis forum

Validated Members
 View Profile  See their activity

  • Posts

    1,428

  • Joined

  • Last visited

 Content Type 

Everything posted by I'mdonewiththis forum

  1. I'mdonewiththis forum
    Do you have a picture of what the switch looks like or possibly the tech data on it like temperature range, N/O or N/C contacts, etc?
  2. I'mdonewiththis forum
    Dave, can you get the other three bolts out? If so, pull them then you can rock the seat and base in order to put something under the base to lift it and cut the bolt or possibly get enough pressure on the bolt to screw it out.
  3. I'mdonewiththis forum
    You mean the water dies not flow out of the spout and comes up where the spout pivots? That would indicate a couple of things. One would be the "O" ring(s) on the spout have failed, and two, the aerator at the outlet of the spout is plugged. That would also explain why the water comes out of the hot and cold knobs. Try unscrewing the aerator and see how the faucet acts. You may need to clean it like the shower head.
  4. I'mdonewiththis forum
    First thing that comes to mind regarding the shower head is to unscrew the hose from the head and check for water flow. If you have decent flow there then try soaking the head in vinegar or even some CLR. What do you mean by this? Tom
  5. I'mdonewiththis forum
    X2 for Millers. They cut my fulltimers insurance cost by about 1/2.
  6. I'mdonewiththis forum
    Um, you guys realize that this thread is over 4 1/2 YEARS old, correct?
  7. I'mdonewiththis forum
    Yea, I know what you mean..........😑 Just not articulate with a keyboard
  8. I'mdonewiththis forum
    My trailer came with a residential fridge along with a 1000 watt inverter and two 12v batteries. During the day traveling I do not turn the inverter on and at the end of the day everything is still frozen. If we are planning on boondocking for the night I turn the inverter on. I wouldn't like an RV fridge anymore. My freezer gets so cold that a bottle of 40 proof (20% alcohol) froze solid!! Yes, I like my drinks cold.......
  9. I'mdonewiththis forum
    First of all, Welcome! Sounds to me like your compressor is about dead. Something is failing inside the compressor and it is pulling way to much power to try to start. It probably shut down from the overload tripping and wouldn't restart due to current draw. I don't suppose you checked to see if you could put your hand on the compressor when it first acted up? It was probably quite hot.......
  10. I'mdonewiththis forum
    Hopefully it would be like mine. It leaked from the git-go, but fortunately water was running under the flange and down the roofing material and dripping in the tub. Poor calking job..... It got fixed real good when a new roof was installed.
  11. I'mdonewiththis forum
    Alan, a quick search found this: https://vanhorntruckparts.com/goodyear-1r12-615-air-bag-1r12-615.html Also this place:https://www.sdtrucksprings.com/index.php?main_page=product_info&products_id=16472 And this one: https://www.stengelbros.net/1R12-375-Goodyear-Rolling-Lobe-Air-Spring_p_1793.html
  12. I'mdonewiththis forum
    I second Miller. My one ton and fulltimers insurance got cut in half by going to them, even though it is the same insurance company that I had before.
  13. I'mdonewiththis forum
    I'm still kicking Al. I will be in your vicinity in September. Maybe we can get together?
  14. I'mdonewiththis forum
    One question I have is where did the leaf(s) break? GENERALLY if the spring broke at the center bolt the ubolts are slightly loose. If the break is just outside of the ubolt overloading is the culprit. Like I said, these are general reasons......
  15. I'mdonewiththis forum
    You probably don't need to reset anything. I had the same one. It sounds like you have the fan set to either high or low. Push the mode button so the light by the fan is on and set it to auto. Easy to get confuzzled with them new fangled contraptions.......
  16. I'mdonewiththis forum
    All I see is a link. I clicked the link and it took me to the Google sign in screen. I signed in and all I saw was the same as Pat & Pete.
  17. I'mdonewiththis forum
    If you were to put lights on and under your trailer and not on the ground your neighbors would not hardly see them. Last winter I was parked next to a trailer that was used about four times all winter and there were bright lights on under it for the first month or so. Yes, it lit up under the trailer quite well, but it was in no way bothersome for me.
  18. I'mdonewiththis forum
    I believe 110psi is going to be just north of Houston, and then be in Port O'Connor after Christmas, Just Don will be back in Port O'Connor just after New Years, and I am in Port O'Connor for a while, Glenn West is somewhat close too. I am sure I'm forgetting some others in the area........
  19. I'mdonewiththis forum
    There is just what you are looking for in the RVs Tows and Toad For Sale forum! BTW, welcome to the forum!
  20. I'mdonewiththis forum
    If you get sealed ones there shouldn't be any probem.
  21. I'mdonewiththis forum
    Yep. Just delete it and put a string of LEDs around it for light if you want more.
  22. I'mdonewiththis forum
    I kind of like the skylight due to there is no light above the tub/shower. HOWEVER, on my old trailer the skylight cracked from fatigue around the screws and leaked, and the skylight in my current trailer (bought new in June) has leaked twice already.............
  23. I'mdonewiththis forum
    Ok, I was mistaken. My 3500w is a Powerwise that looks just like a Champion, but mine is red. It has a Jiangoong 6.5 engine that is a Honda knockoff.
  24. I'mdonewiththis forum
    I got that information by looking up the parts. The engine on mine does not say Honda, but it is a Honda knockoff and YES, the coil and even the carb is the same ON MINE.
  25. I'mdonewiththis forum
    Mine did once. The coil failed. Turns out it was the same engine that the Honda uses and all the parts were the same.
×
×
  • Create New...