PEIFamily Posted December 11, 2016 Report Share Posted December 11, 2016 Open to offers.. A little duct tape and JB weld, and these would be like new. I could be convinced to include the KOA staff shirt as well for the right price Wasn't too big a job changing them, ONE bolt broke loose inside and had to cut the nut off. After finishing, I decided to finally tackle putting my new fans belts on I bought a year ago but kept dreading doing it.. WHAT A BUGGER OF A JOB!!!! I did NOT remove the fan belt, that would have made it easier, but I was scared of opening up a bigger can of worms. I did notice that I have some play in my power steering pulley though Link to comment Share on other sites More sharing options...
Alie&Jim's Carrilite Posted December 12, 2016 Report Share Posted December 12, 2016 I think I put some zip ties around them before they hit the trash bin. If one of those decide to "Spring" it could fly and hit/hurt items or people. Link to comment Share on other sites More sharing options...
HERO Maker Posted December 12, 2016 Report Share Posted December 12, 2016 Good job. The next ones will be easier! Link to comment Share on other sites More sharing options...
PEIFamily Posted December 12, 2016 Author Report Share Posted December 12, 2016 I debated cutting the springs, there is no pressure on them and can move them by hand easily. Link to comment Share on other sites More sharing options...
adept99 Posted December 12, 2016 Report Share Posted December 12, 2016 Think those'll be OK for a core charge?? Link to comment Share on other sites More sharing options...
PEIFamily Posted December 12, 2016 Author Report Share Posted December 12, 2016 Hopefully. Nothing that couldn't be repaired. Lol Link to comment Share on other sites More sharing options...
Hewhoknowslittle Posted December 13, 2016 Report Share Posted December 13, 2016 I think I put some zip ties around them before they hit the trash bin. If one of those decide to "Spring" it could fly and hit/hurt items or people. Jim, These are off the front steer axle, no springs. Roger Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.