RossBoss Posted July 18, 2017 Report Share Posted July 18, 2017 Has anyone installed a rollback deck And converted a wheel lift to a 5th wheel hitch ? (On a semi rig ) Link to comment Share on other sites More sharing options...
Dollytrolley Posted July 18, 2017 Report Share Posted July 18, 2017 Forum member Ronbo has a nice KWooper with a rollback that he loves.....he has his Jeep on the bed and tows his fiver and with no ramps it's almost a while glove operation.... New rollbacks are a bit pricey but used units are not too bad. Drive on.....(tilt and roll is nice....) 97 Freightshaker Century Cummins M11-370 / 1350 /10 spd / 3:08 /tandem/ 20ft Garage/ 30 ft Curtis Dune toybox with a removable horse-haul-module to transport Dolly-The-Painthorse to horse camps and trail heads all over the Western U S Link to comment Share on other sites More sharing options...
Sean217 Posted July 18, 2017 Report Share Posted July 18, 2017 Here's another topic on the subject. Sean Link to comment Share on other sites More sharing options...
Ronbo Posted July 18, 2017 Report Share Posted July 18, 2017 I believe I am the only one with a rollback deck. It will be at the national rally. I have an ET Junior hitch. Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
alan0043 Posted July 19, 2017 Report Share Posted July 19, 2017 14 hours ago, RossBoss said: Has anyone installed a rollback deck And converted a wheel lift to a 5th wheel hitch ? (On a semi rig ) Hi Ross, Welcome to the forum. I see this is your first post. Good luck with your truck. Sorry that I can't answer your questions. Welcome to the world of HDT's, Al 2012 Volvo VNL 630 w/ I-Shift; D13 engine; " Veeger " Redwood, model 3401R ; 5th Wheel Trailer, " Dead Wood " 2006 Smart Car " Killer Frog " Link to comment Share on other sites More sharing options...
Ronbo Posted July 19, 2017 Report Share Posted July 19, 2017 I may be able to answer your questions about roll back deck. Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
tyates007 Posted July 20, 2017 Report Share Posted July 20, 2017 I looked at Ron's bed when we were in Idaho at the WCR. It was pretty cool. I'm very envious of it, especially right now while I am changing air bags and a leveling valve. Link to comment Share on other sites More sharing options...
Exile Posted July 22, 2017 Report Share Posted July 22, 2017 Heres one for sale for not too much https://houston.craigslist.org/hvo/d/rollback-bed-heavy-duty/6194489856.html 98 379 with 12.7 DD LG Dodge w/5.9 CTD Chrome habit I’m trying to kick. Link to comment Share on other sites More sharing options...
RossBoss Posted July 22, 2017 Author Report Share Posted July 22, 2017 On 7/19/2017 at 4:21 PM, Ronbo said: I may be able to answer your questions about roll back deck. I was worried about the deck hight being high. Is your jr.hitch mounted right in the deck ? Link to comment Share on other sites More sharing options...
Ronbo Posted July 22, 2017 Report Share Posted July 22, 2017 Yes. I used 12 in channel and built a box that is hung under the deck. The ET Junior is then mounted in the box. Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
RossBoss Posted July 22, 2017 Author Report Share Posted July 22, 2017 Ok ! I C thanks. It appears you didn't stretch the frame on your rig ! Correct ? What's your deck height with the rolldeck ? If ya don't mind ! And deck length ? Is it standard length or chopped Thanks in advance Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.