runaway parents Posted February 22, 2017 Report Share Posted February 22, 2017 So I have a lot of experience working a lot of construction equipment rebuilding engines and such .Never had the opportunity to change a valve cover gasket on a Volvo D13. Found out today I have a leak on the drivers side back by the fire wall .So is there any thing special I need to know or watch out for ? Torque procedures? Typically how much is the gasket? Doesn't look to like rocket science but you never know miss one thing it can cost you a fortune. Link to comment Share on other sites More sharing options...
Alie&Jim's Carrilite Posted February 22, 2017 Report Share Posted February 22, 2017 Are you sure that isn't the injector harness leak? Alie & Jim + 8 paws 2017 DRV Memphis BART- 1998 Volvo 610 Lil'ole 6cyl Cummins Link to comment Share on other sites More sharing options...
runaway parents Posted February 22, 2017 Author Report Share Posted February 22, 2017 Yup coming out of the valve cover gasket. It Is puckerd out a little and oil is running down the block from this point. . Link to comment Share on other sites More sharing options...
Broncohauler Posted February 22, 2017 Report Share Posted February 22, 2017 Can't tell you about repairing it but we've had this on almost all of our new trucks. Mine started leaking at 10k miles Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.