Direct link and Jackalopee

[Cheyenne1]

I just finished up my truck today and took on a short trip to shake it down. 
Only issue is the ABS light came on.  Truck was fine before.   
stopped and disconnected the data link plug, re started, light went off and stayed off. 
 

Has anyone had issues like this ?   I have not looked at anything or scanned codes to see what code it was. 
truck is a 2019 Peterbilt 579.  Looking for am easy solution as this project has taken way to long.  Lol 

thanks 

[Moresmoke]

Could be as simple as a loose connection, or more involved. Really need codes to tell what is up. Unless you have software to connect to the brake module, you may not show any codes when the ABS light is not on.

[mike5511]

12 hours ago, Cheyenne1 said:

I just finished up my truck today and took on a short trip to shake it down. 
Only issue is the ABS light came on.  Truck was fine before.   
stopped and disconnected the data link plug, re started, light went off and stayed off. 
 

Has anyone had issues like this ?   I have not looked at anything or scanned codes to see what code it was. 
truck is a 2019 Peterbilt 579.  Looking for am easy solution as this project has taken way to long.  Lol 

thanks 

I’d call DirecLinc. After I made sure my wiring was all correct. 

[Cheyenne1]

Wiring was all correct. 
for some reason the truck did not like the module at first. 
After I set it up the 3rd time the trucks abs module was ok with it. 
Talked to Allen at direct link, he had never seen this happen before.  
All is good now with it.