Jaydrvr Posted January 8, 2019 Report Share Posted January 8, 2019 Where is a good place to tie in the brake switch connection without cutting into the wiring harness? I COULD just start taking the dash apart to look for a good place, but I'd rather not.. Thanks in advance, Jay Quote Link to comment Share on other sites More sharing options...
DesertMiner Posted January 8, 2019 Report Share Posted January 8, 2019 (edited) Do you have a Jackalopee? If so take it off of the truck side of the brake light connection. If not then how about where your trailer brake lights get the signal from the truck. Edited January 8, 2019 by DesertMiner Quote Link to comment Share on other sites More sharing options...
Alie&Jim's Carrilite Posted January 8, 2019 Report Share Posted January 8, 2019 That's what I did. Pulled off the Jackoloppe. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.