bmzero Posted March 10, 2016 Report Share Posted March 10, 2016 This is a part I have been working on for a while. I sent these off to JC for a little laser and bending treatment. I hope to have them at the ECR for the presentation. These will screw directly into VersaTie track. They tightly follow the contour of a Smart car tire. There are three holes in the chock to allow for easy, exact placement (holes are 1" apart). They weigh just a weld bead over 2lbs each, all .25" 5051 aluminum. They will have rubber stoppers on the bottom to keep them from marking up the bed surface. View High Resolution Photo View High Resolution Photo View High Resolution Photo "Willy Mammoth" - Volvo 730, Sold Heartland Cyclone 4000 Toy HaulerT-Minus 26 years and counting to being a full timer. Link to comment Share on other sites More sharing options...
SuiteSuccess Posted March 10, 2016 Report Share Posted March 10, 2016 Very nice. 2006 Volvo 780 "Hoss" Volvo D12, 465hp, 1650 ft/lbs tq., ultrashift Bed Build by "JW Morgan's Custom Welding" 2017 DRV 39DBRS3 2013 Smart Passion Coupe "Itty Bitty" "Don't go around saying the world owes you a living. The world owes you nothing. It was here first!" Link to comment Share on other sites More sharing options...
remoandiris Posted March 10, 2016 Report Share Posted March 10, 2016 Do they work with a RZR or do you have other chocks for that? Link to comment Share on other sites More sharing options...
bmzero Posted March 11, 2016 Author Report Share Posted March 11, 2016 Do they work with a RZR or do you have other chocks for that?They will work with a RZR as long as it doesn't have a long arm kit on it (to increase the width). Working with the RZR is why I have the three holes in the bottom of the chock. The wheelbase on the RZR-S is longer than the Smart and the chock may need to hang off of the bed slightly. I'll get some photos of them with both vehicles soon. "Willy Mammoth" - Volvo 730, Sold Heartland Cyclone 4000 Toy HaulerT-Minus 26 years and counting to being a full timer. Link to comment Share on other sites More sharing options...
bmzero Posted March 11, 2016 Author Report Share Posted March 11, 2016 Very nice.Thanks "Willy Mammoth" - Volvo 730, Sold Heartland Cyclone 4000 Toy HaulerT-Minus 26 years and counting to being a full timer. Link to comment Share on other sites More sharing options...
CDR Posted March 11, 2016 Report Share Posted March 11, 2016 Bmzero, Seen anyone with a "General" carried on the back? Lengthwise or widthwise? Curt 2001 Freightliner Century, 500hp Series 60, Gen 2 autoshift, 3.42 singled rear locker. 2004 Keystone Sprinter 299RLS (TT) 2 & 4 Wheelers! 2013 Polaris Ranger 800 midsize LE Our motto "4 wheels move the body, 2 wheels move the soul!" Link to comment Share on other sites More sharing options...
bmzero Posted March 11, 2016 Author Report Share Posted March 11, 2016 Bmzero, Seen anyone with a "General" carried on the back? Lengthwise or widthwise? Curt The width of the General would not be a problem as it's the same as the RZR-S, however, it's 4" longer (going by memory). It also has a 2" longer wheelbase. The RZR-S is 104", I believe, so it's already over the limit by a couple of inches. Here's the RZR-S. View High Resolution Photo "Willy Mammoth" - Volvo 730, Sold Heartland Cyclone 4000 Toy HaulerT-Minus 26 years and counting to being a full timer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.