GlennWest Posted July 17, 2016 Report Share Posted July 17, 2016 When we upgraded to the Pathway X2 we got a new receiver also. Been playing great. Well about 2 weeks ago we were watching a show and screen goes black. After a pause it comes back up to re scan. It is like the receiver loses its memory. It has done this 3 more times. No pattern to it. We rescan and all is fine until next time. Receiver? Link to comment Share on other sites More sharing options...
Dutch_12078 Posted July 18, 2016 Report Share Posted July 18, 2016 Which receiver do you have, Glenn? Link to comment Share on other sites More sharing options...
GlennWest Posted July 18, 2016 Author Report Share Posted July 18, 2016 Vp 211z Link to comment Share on other sites More sharing options...
Dutch_12078 Posted July 18, 2016 Report Share Posted July 18, 2016 That does look like a receiver issue unless there's an intermittent 120-volt power issue, such as a bad outlet, etc. It could be something as simple as a loose wire or power cord plug. Link to comment Share on other sites More sharing options...
GlennWest Posted July 18, 2016 Author Report Share Posted July 18, 2016 Last time I looked at receiver to see if power light was on and it was. Don't believe it looses power. Link to comment Share on other sites More sharing options...
Dutch_12078 Posted July 18, 2016 Report Share Posted July 18, 2016 Ok, it could be a failing receiver then. It would only take a brief power glitch though, to cause a reset. Is it going through the full reset or just rescanning for satellite signals. Rescanning could also indicate an X2 or coax connection issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.