SWharton Posted December 16, 2015 Report Share Posted December 16, 2015 We are thinking of getting a Gen-Turi Exhaust System. We understand how it works and installs but have a different question. Our exhaust is in the back of the MH and we have a Protect-A-Tow so we want to leave the 90 degree tube on all the time so we can run the generator without melting the Protect-A-Tow. We would add additional exterior insulation to the tube to protect the Protct-A-Tow. Is the feasible? Thanks Link to comment Share on other sites More sharing options...
Dutch_12078 Posted December 16, 2015 Report Share Posted December 16, 2015 My generator exhaust also extended out the back where it would interfere with my PAT. I cut the pipe far back enough to add a standard exhaust elbow and brought the pipe out at the rear corner instead. The Gen-Turi adapter was installed there. Dutch 2001 GBM Landau 34' Class A F-53 Chassis, Triton V10, TST TPMS 2011 Toyota RAV4 4WD/Remco pump ReadyBrute Elite tow bar/brake system Link to comment Share on other sites More sharing options...
SWharton Posted December 17, 2015 Author Report Share Posted December 17, 2015 Thanks, we will look into this a little more. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.