QLStar Posted February 24, 2015 Report Share Posted February 24, 2015 How is everyone wiring up their marker lights and tail lights. Are you using the ICC connection in the Jackalopee for tail and marker lights for the truck and trailer or the ICC just for the marker lights on the truck. I like the flash feature of the ICC markers just not sure what all should be connected to that connection. Don't want to do it wrong. 2007 Volvo VNL 670, Cummins ISX 450. Auto, APU. "PoTater" 2013 Landmark San Antonio, 41' idahopotater@gmail.com Link to comment Share on other sites More sharing options...
tyates007 Posted February 24, 2015 Report Share Posted February 24, 2015 I wired my taillights and markers directly into the truck harness. I am running all led so not much draw. Link to comment Share on other sites More sharing options...
phoenix2013 Posted February 24, 2015 Report Share Posted February 24, 2015 If you want to flash the trailer, plug the green wire (pin 3) into the ICC MARKER OUT tab in the Jackalopee. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.