Bill w/bus Posted November 16, 2020 Report Share Posted November 16, 2020 Controller blinking with "Home El Motor Failure". If I knew the sensing criteria that would help to determine the troubleshooting. Any thoughts? Thanks Bill Quote Bill & Lynn Baxter MCI102A3 Conversion, Detroit Diesel S50 Link to comment Share on other sites More sharing options...
Chalkie Posted November 16, 2020 Report Share Posted November 16, 2020 I do not have this antenna but there are a number of references to this error on various forums. It seems to be an error that is shown when the antenna is attempting to return to the "home" or lowered position. In almost all references I saw Winegard's solution was to run a re-calibration procedure. One of the forums posted that process. Quote Link to comment Share on other sites More sharing options...
Bill w/bus Posted November 18, 2020 Author Report Share Posted November 18, 2020 Thank you. Tech assistance provided a detailed calibration procedure with pictures of expected screen data to calibrate the Elevation motor setpoint. Calibration was successful. Again thank for help. Bill Quote Bill & Lynn Baxter MCI102A3 Conversion, Detroit Diesel S50 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.