Jump to content

Fitting help


Shallow Draft

Recommended Posts

I am replacing my exhaust brake governor valve. Every thing has been fairly easy until I tried to remove the push in brass fitting on the top of the valve body. I couldn't get it out and I need a replacement fitting.. Volvo does not have a part # for this and I am wondering what others have done to get a fitting . It may be a std brass fitting available locally but I am not sure.

As always any help is appreciated

 

Greg

2004 Volvo 630, Freedomline, Rear view camera, Max Brake, Jackalopee, 38 ft 4 horse LQ Platinum, 40ft Jayco Talon toy hauler

Http:/www.flickr.com/photos/shallow_draft/

Https://flic.kr/p/fqhyAN

 

You are not lost if you don't care where you are!!

Link to comment
Share on other sites

Wrong again. 976444 is the correct # and it is ordered. Very good parts person in Calgary found it and confirmed by another great parts person at Vanguard in Phoenix.

2004 Volvo 630, Freedomline, Rear view camera, Max Brake, Jackalopee, 38 ft 4 horse LQ Platinum, 40ft Jayco Talon toy hauler

Http:/www.flickr.com/photos/shallow_draft/

Https://flic.kr/p/fqhyAN

 

You are not lost if you don't care where you are!!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

RVers Online University

campgroundviews.com

RV Destinations

Find out more or sign up for Escapees RV'ers Bootcamp.

Advertise your product or service here.

The Rvers- Now Streaming

RVTravel.com Logo



×
×
  • Create New...