GlennWest

Got some more but no use in trying.

i click on that and page states wrong turn

interesting. I removed front and rear and didn't work. Thanks.

nothing works

https://i.imgur.com/Rto6wLel.jpg Well I tried.

Thank you. Have a surge guard hard wire already.

If I get an ATS which would you recommend. Goggled it and lots of them.

One function that is nice I can choice between solar, battery and shore power in any order I program into it.

The rear is in a compartment with a spring loaded cover over it.

Well to wire up inverters I have to disconnect it anyways. Shore power goes to inverters first.

That is a battery disconnect. Not what I was looking for. I used Blue Sea for my battery disconnect.

I was working in Denver area, Actually staying in Golden. It was winter time. The park provided a 100 pound tank for us. They filled it too. But I know most all propane suppliers will bring you a tank and keep it filled.

Ya'll done lot more traveling than us. Never been where midway wouldn't work. Not saying there aren't parks out there where it is needed. I could splice into it and have one at end and center. Likely easiest too.

My intention is midway. Right where water and sewer connections are. Be easy to get to also. I may just abandon that cable. It around $300.00 worth of cable though at today's price.

I tow with my HDT. It is roughly 30'. So I need to get Teton as far back as possible so truck can stay in front. I have on several cases had to park truck elsewhere or go buy an extension for my service. Don't really care for extensions. The midway location should work most places

My panel is midway. Actually in bathroom. could pull out the feed line and tie into it. But wanted to relocate it. Very inconvenient at rear of unit.

I don't have a transfer switch. Yours must have come with a generator or at least factory equip

My thoughts are relocating it. It at very back of my Teton. Bring it halfway. How well do you think Teton anchored it. Would like to pull line forward to inverters. Would save me right much money. Wire expensive now.

I hooked up the pv wires this evening. No sun and cloudy. No problem. Got battery disconnects mounted and wired. Hot line to one inverter. Supposed to rain again tomorrow

Thank you

Sounds like a good plan. Thanks

That is a lot of cover. The entire roof. I have done ac with no gloves just be careful not to touch ground. Be easy to do that with the pv wire. All 4 ends are tapped so I should be safe.

Do I need this for the solar? 250vdc at 10 amps. Or just unplug one end at panels and make connection at breakers?

Well your example can't happen. Not possible to plug anything into it. Basically all I have now is a disconnect switch.

Guys I was thinking wrong about the amps I got coming in. They are all in series so only 10 ish amps. Bought a 63 amp breakers. 30 amp would have been plenty. Should I change it.