billr Posted February 25, 2019 Report Share Posted February 25, 2019 We upgraded the other day to the Hopper 3 and after two days of normal operation this AM it started to go blank no msg. Then restart. After about 2-3 min it showed programming. This repeated all day. I tried a reset, power cycle, different power source and at Dish tech support request a partial reset. It continued, unplugged it for several hours. Powered it up again tonight and it’s staying on so far. Using DVR to watch and programming seems to be available too. Dish tech coming in AM. Maybe replace it? Anyone have any thoughts ? Bill and Joan and 3 Collie pups 2001 Volvo VNL 770 "The Doghouse" Singled short, "ET" hItch VED12 465HP Gen 1 Autoshift 3.58 ratio 2005 Mobile Suite 38RL3 2011 Smart Passion loaded piggybacK Weigh-It Portable RV Scales http://www.weighitrv.com/ Link to comment Share on other sites More sharing options...
billr Posted February 25, 2019 Author Report Share Posted February 25, 2019 Dish tech verified power source was good (as it was) then replaced with new Hopper. He said he saw this once before and replaced. Now transferring recordings Hopper to Hopper. Bill and Joan and 3 Collie pups 2001 Volvo VNL 770 "The Doghouse" Singled short, "ET" hItch VED12 465HP Gen 1 Autoshift 3.58 ratio 2005 Mobile Suite 38RL3 2011 Smart Passion loaded piggybacK Weigh-It Portable RV Scales http://www.weighitrv.com/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.