RWeigant

A multi meter is not going to show video. My screen is lit up blue, so I know power is getting to it. Of corse there are a few PC boards in the way.

The fridge you have is made by Dometic I'm sure. If it was mine I would get a Dinosaur Electronics board. High quality circuit boards for RV appliances is their bussiness. Great products. Don't buy another Dometic board. http://www.dinosaurelectronics.com/index.htm

A few years we were in Yuma and got caught in a wind storm. I opened the door and the wind grabbed it and it slipped out of my hands opened all the way braking the arm and broke the mirror housing from the post it sits on. I called the manufacture and they asked me to send it to them. They have a one cost fix. I think it was $130. See what you have and call them. Not sure of my make of mirror.

I have a 2013 Fleetwood American Tradition with a problem. Center of the dash has a information system that displays all 3 cameras and tire pressure and also other information. Sony monitor. This has worked for me for a long time, but now nothing, just a dreaded blue screen. No imputs from drivers pad or cameras. Don't know where to go with this. The name of the system is Silverleaf. I have all the wiring info and have located all the components. All the fuzes and connections look OK. Where is the control computer located? Any info to help me with this.

I have a 2013 Fleetwood American Tradition with a problem. Center of the dash has a information system that displays all 3 cameras and tire pressure and also other information. Sony monitor. This has worked for me for a long time, but now nothing, just a blue screen. No imputes from drivers pad or cameras. Don't know where to go with this. Don't know the name of the system or any other info to help me with this. Any help would be nice.

Pacific Shores Ocean in Newport, Oregon for $110. We got a few nights there free because we bought a RV from a Portland RV dealer. Very nice with a ocean view.

Mine did this from the start. I tried the wand with the little propeller on the end. It worked some. What is happening is you bold up a pyramid of paper and other stuff at the bottom of the pipe. What I found is that filling the bowl to the top and use a plunger like this: https://www.amazon.com/Professional-Accordion-Pressure-Commercial-Bathrooms/dp/B07F97CCB3/ref=sr_1_6?crid=14CJZ9346A4JT&keywords=toilet+plunger&qid=1579890689&sprefix=toilet%2Caps%2C281&sr=8-6 It does the trick for me. This pushes allot of water down and up plugs. Also, don't empty your black tank until you arrive at your next stop.

My 2013 American Tradition has a had a problem with the hydraulic jacks. Working out the problem I decided to take the motor apart. When I did I discovered the inside of the motor was rusted and packed with dirt. Got a replacement motor and solenoid. My question is the wasn't there a gasket between the two? Or, was there Permatex used for a gasket, or nothing at all?