DG N. AL

19 hours ago, GeorgiaHybrid said:

That looks close to the "bow tie" near Ten Sleep.

Highway 14 up near Shell.  We were camping in Ten Sleep.

20 hours ago, rickeieio said:

Good for you!!!!  It looks like you retired!!!  We love the Big Horns.

Retired last fall.  We sold the equipment in December.   Retirement is NICE!!!

An HDT in the wild.  We were in the Bighorn Mountains of Wyoming. 

I am looking for some spoked rims for a 2015 Smart (3-hole).  I have steel rims with hub caps, but I have to remove the hub caps to tie the Smart down on the truck.  I would like to get some spoked cast rims.   Does anyone know of a source or have some spare rims sitting around?

2 hours ago, mike5511 said:

If you are not on the Smart Car Forums and Smart Car Facebook pages, now would be a good time to join them. See wheels and parts and ideas all the time on those pages. They are pretty active.

I am on a couple of the forums.  The "For Sale" one that I am on is dominated by the admins.  They list items for sale, but will not give locations or prices.  They reply to all inquiries with "direct message me".  I don't know that I trust someone who will not give their location or price in an ad.

I am looking for some spoked rims for a 2015 Smart (3-hole).  I have steel rims with hub caps, but I have to remove the hub caps to tie the Smart down on the truck.  I would like to get some spoked cast rims.  2five6-two14-one806

On 7/17/2023 at 7:19 AM, SuiteSuccess said:

I’m not going to help with any advice but will definitely sympathize with you.  When my ECM went out I got all kinds of funky codes and communication errors.  It took a shop with a computer and $6k to get it running.  I know that is depressing but as rickeieio says “We pay to play”.  BTW did you find a suitable campground for longer term?

Well, I guess I got off lucky.  I just had to replace the engine ECM in my 2012 D13.  It cost $450 to have it towed to Volvo and $5,000 for them to replace the ECM and a couple of other parts.

I have a Victron 12/12 30 amp charger on my fifth wheel.  I have 4 lithium batteries.  Lithium needs a higher charging voltage than lead acid.  The Victron steps up the voltage so the lithium batteries reach full charge.  I have  4 gauge wires running from the truck batteries to the hitch on the truck.  They run thru a relay that is switched in the cab.  I also have a residential fridge and my batteries stay 98% or better on long travel days.  The Victron has adjustable charging profiles that can be set for the battery type.

22 hours ago, rickeieio said:

We won't get there until late March, when you're busy poking corn seed into the ground. 😞

For the last time......

On 1/20/2023 at 8:38 AM, rickeieio said:

After we leave Bandera, we'll eventually get to Summerdale, AL, where we'll meet up with friends.

Hey Rick,  

Any idea when you might get to AL?  We were planning a trip to a COE camp in in central or south AL some time in February.  It all depends on farming.  You know how that goes.  It might be where we could meet up with you.

On 12/20/2022 at 6:28 PM, trimster said:

Sorry...59. Same road as the expressway. 

Well, we must have driven right past you.  Darn.....

37 minutes ago, trimster said:

Sorry we missed you folks. We're just up the road off 58 from there. Be here until the end of January. 

I am not familiar with 58.  We took the Foley Beach Expressway in and out.  I wish we had known you were near.

We were down there 2 weeks ago and I did not see it.  We spent a week at Gulf State Park.

Not sure where you want to be located, but we stayed at the Las Vegas RV Resort (https://www.lasvegasrvresort.com/) 3 years ago at Thanksgiving.  We were up at Zion and a big snow storm hit so we bugged out to LV.  We were able to get reservation at the last minute.  The park was not bad at all.  But it is not very convenient to the strip. 

On 12/18/2022 at 9:09 AM, ms60ocb said:

What bothers me is the price difference, Just yesterday in LA or eastern Texas I saw $2 difference between gas and diesel, $1.30 was common .

Clay

 

I have a fleet card (TSD) and I see discounts from the pump price of as much as a $1 a gallon.  Fleets are not paying those inflated pump prices.  Truck stops are making money on diesel from the little guys....

We have not made reservations, but we are keeping the date on our calendar. 

The Glenns made it home safe and sound.  We had a great time seeing old friends and making new ones.

11 hours ago, Danfreda1 said:

Will be good to see you again we met you in quartzite 

Looking forward to it.

We registered and have site 312.  Now if the weather and farming just cooperate.......

Chad, my RZR will arrive today.  Your welcome to a turn in it 

We will roll out in the morning.  We should be pulling in sometime on Saturday.

Susie and Don plan to arrive on the 22nd.

Just a follow up.  After asking 3 Volvo techs one finally showed me where the dash "Auxiliary Switch" wiring terminates.  There are 3 single pole Metripak 280 series plugs on the firewall under the steering column.  These are your connection points for the 3 "Aux" switches that are on the dash.

I have a 2003 Volvo with a ISM Cummins and a 9 speed.  It starts with the clutch up.

4 hours ago, Sculptor said:

So idk what your switch connections look like.  IF you have loose wires, maybe you can use them.  You said you can’t find any connection points, so there are no wires in the vicinity of the aux switches, or no loose unused connections anywhere behind the dash?

I found one or 2 of these were live when the key is on.  One was connected to The 12 volt outlet, one was live, one was dead.  I took a photo of these connectors but it was two or three years ago.  I wanted to find a matching connector for some reason.  Might have been because some are live and usable.

 

After further investigation, I found connectors like you have pictured that went to the aux switches.  But all of these connectors were full.  The wires are labeled with "Pin" numbers (Pin 181, Pin 208, etc.)  I don't know where these wires go and they are impossible to trace.  One of the aux switches is in use (lights and a camera power).  As far as I can tell, the other 2 aux switches don't appear to control any thing.  I suspect they terminate at empty connectors some where on the frame as part of the "body builders" provisions.  The few online schematics I have have found are very vague.