I’ve got the same issue from this old post. N611 turns on for propane only.
replaced the board and same thing.
Board is getting 120v. There is 120v on either side of the glass fuse. There are zero volts at the element tabs on the board. The element is at 46 ohms. Fuse is good.
The board also has 12v. The DC fuse is good. Checked the (white/violet wire and green wire) going to the eyebrow board and it’s 12v.
Fridge automatically turns on to propane. Never recognizes 120v.
Can’t imagine I have another bad board? (Brand new replacement).
Works fine on propane.
Eyebrow board is a single button with a single led light.
any other ideas?
