My refrigerator was having the same issues as everyone else, no power. After checking all fuses and replacing the circuit board with still no power, I found out that there is a “Snap” fuse located on the propane gas vent that went bad. This is a fuse that will cut the 12volt power off to the fridge if the stack over heats reducing risk of fire. It also cuts power to the gas valve as well. After replacing this “snap” fuse, power was restored to the circuit board and everything is working as it should. Wish I had known about it before replacing the circuit board. $30 snap fuse, while circuit board cost me $120. Still better than replacing entire refrigerator.
Good luck and I hope this information helps someone else.
