I have a Suburban SF-25F RV Furnace that is not working properly. I followed the instructions to start and here is what it does:
- Blower comes on
- You can hear the igniter click
-then you can feel and hear the burner blowing hot exhaust out
- however it only lasts about 20 seconds then turns off and
- then cycles two more times doing the same thing
- then after the third attempt the blower runs for about 5 minutes and turns off.
What have I done:
- Removed the furnace and checked the "sail switch" (after isolating it I held multimeter to it and move the switch up and down, continuity when on and off as I moved the switch.
- Then I isolated the High Temp switch and had continuity thru it.
- then I disconnected and reconnected all wires to ensure goo connection.
BUT IT STILL DOES THE SAME THING. Any ideas