youngwillyd
-
Posts
12 -
Joined
-
Last visited
Posts posted by youngwillyd
-
-
I removed all the metallic tape. It still tripped the GFCI. I plugged into a non GFCI circuit. This caused some sparking when I touched the leads and some clicking that I think might have been from the little part that is metal and round. This is the part number - 3108706.9729. I blew the 3 amp fuse on the circuit board so I am done until I can get some fuses. Any thoughts?
-
I have installed a new Amish cooling unit. I replaced the ice maker supply line and wrapped it up with the silver metallic tape. It was wrapped with black tape before. Now when I plug the ice maker line heater in it trips the gcfi. Any ideas?
-
After a great, great deal of searching, I finally found a Dometic part number by searching for Dometic recall. With the Dometic part number I was able to search for and locate some. The part is called a resettable thermal switch. I finally located one at SUPPLYHOUSE.COM. It is a 290 degree Fahrenheit Red Resettable Thermal Switch. It was only $6 compared to the one with Dometic in it’s name being more than $18.
-
My fridge quit. I am getting a new cooling unit. The switch on the boiler/stack is dead. It has the code 36FXE24 on it. When searching this it appears this is a dryer fuse. It is not resettable. From research it appears this switch should be resettable. If I knew what the temperature limit was I could probably find one, but so far I am getting nowhere. Anyone know anything about this? Thanks
Willy
Dometic NDR1292 trips gcfi
in Technical Tips and Tricks
Posted
Looks like that is what happened. Plugging black to black and white to white seems simple enough. If I was setting this up originally I would put different ends on the 12v and 120v so they couldn’t be plugged in wrong. I looked back through the videos and I didn’t see any concerns about plugging in the 12v to 120v.
I guess I have burned something up. Now I have power back to the refrigerator, but it doesn’t do anything. I hear some clicking when I turn it on, but it doesn’t start. It doesn’t display AC or gas. I can smell gas like it starts to run but doesn’t spark.