ANG0225 Posted December 31, 2016 Report Share Posted December 31, 2016 We have two of the weatherstrips that seal the slideout that are not staying where they should. They are the kind that slide on a channel. Seriously thinking about getting some silicone to apply with a caulking gun, then let the slider compress it to allow it to set. Perhaps there is a better way? Link to comment Share on other sites More sharing options...
Randyretired Posted December 31, 2016 Report Share Posted December 31, 2016 If the weather striping is rubber silicone probably won't stick. Randy 2001 Volvo VNL 42 Cummins ISX Autoshift Link to comment Share on other sites More sharing options...
Flying Finn Posted December 31, 2016 Report Share Posted December 31, 2016 Try a pop-rivet at the top of seal to hold it. Link to comment Share on other sites More sharing options...
Ronbo Posted January 1, 2017 Report Share Posted January 1, 2017 Is the channel not staying attached to your rv or is the seal not staying attached to the channel? Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
RV_Fan44 Posted January 11, 2017 Report Share Posted January 11, 2017 Try a pop-rivet at the top of seal to hold it. I second this idea Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.