pfhays

Today I traveled US 89 into St Mary from Browning coming in from the south. There is major road construction going on with traffic stopped in one direction while the other direction is led through with a pilot car. Most of the construction area is dirt road, some gravel and lots of bumps. I tried to get into the St Mary KOA but they were booked when I called. Now I'm glad I didn't get a reservation.

Not a VIN decoder but Damon Rapozo has a website with CC model information at https://damonrapozo.com/model-history pete 2000 CC Magna CAT C-10, #5892

Extracted and abbreviated from Atwood recommendations. Shut off water supply and water pump. Remove drain plug and drain water heater. Use a flushing wand to flush the water heater. Replace the plug and remove the pressure/temperature valve. Refill the water heater through the pressure/temperature valve with vinegar and water. Begin with a gallon of vinegar then a 1/2 gallon of water. Repeat until water heater is full. Replace p/t valve and turn water heater on and let is cycle four or five times. Let the water cool and drain. Flush with the wand again. Replace drain plug and fill the water heater with water by normal method. Should be good to good to go.

Have no experience, but there is a Sleep Inn behind the driver's license place on Russel Street in Sioux Falls. About 3 miles from the airport. I used this DMV a couple of years ago. Went in when they opened in the morning and walked out about 20 minutes later.

Just had my Maximum Signal fail. The red light won't go off regardless how far my antennas are separated. I went online and contacted them through the web site and called twice hoping to resolve the problem. No luck, no response. And the system is less than one year old. I guess I could go with the WeBoost but one of the things I liked about the MaxSignal was the range of the inside antenna.

Another vote for the Dyson V6. I bought the motorized head. Amazing performance for a battery operated unit. Amazingly high price though.