crstrm

Greetings, Has anyone driven SR-377 from Holbrook, AZ to Heber, AZ? We travel in a 25’ Class B and wonder about the road. We are looking at staying at Canyon Point Campground in Forest Lakes which is about 20 miles west of Heber on SR-260. Thanks, Connie

After finding a Serenity to look at, we purchased a 2016 Leisure Travel Van, Serenity Model and are going through the motions of learning all about it. Any other Serenity owners out there?

Hello, We are considering purchasing either a Coachman Galleria 24FL or a Leisure Travel Van, Model Serenity. At this point we would like to see those two vans to determine which one we might purchase. If you happen to have either of these vans and are in the Tucson area, would it be possible to come by and take a look? Thanks for your time. Connie

Greetings, We are considering having the carpet replaced on the slideout in our fifth wheel. Has anyone had any recent experiences with using RV Renovators in Mesa, AZ? Thanks, Connie

Thank you all for your replies, links and for insight onto how the Mountain Directory book works. Looks like we'll go the I-25 route.

Greetings, We are heading from Albuquerque to Las Vegas, NM. Could anyone give me information on I-25 Glorietta Pass (% grade, length)? My Streets and Trips indicates a pass but Mountain Directory doesn’t mention anything about it. If I don’t go via I-25, is US 84 near Edgewood, NM an option? Thank you Connie

We currently own a 2007 29-5E Arctic Fox, 32 foot (which has since been discontinued). We have had very good luck with it in our 10 years of full timing. I would suggest you check out the AF forum but I believe you need to pay a nominal fee to make posts and look at ALL the entries. You can look at only some of the posts. If you have specific questions, feel free to PM us.

We just purchased an 8800L and were able to get the prepaid unlimited plan. We purchased the 8800L at a Verizon Corporate store ($200) and they handled getting the prepaid plan setup for us..

Greetings, The Waste Ball Drive Arm (part# 42048) on my Thetford Aqua Magic Style II has snapped off. The instructions state that I have to remove the toilet to replace the waste ball drive arm. http://www.thetford.com/wp-content/uploads/2015/04/1449/Service-Kit-34106-Pedal-Cable.pdf It looks to me that I could possibly unscrew the Waste Ball Drive Arm and replace it with a new one without removing the toilet. If anyone has done this job, is it possible to replace without removing the toilet. (The link above reads “pedal cable” replacement but that description is incorrect.) Art