Jump to content

scubadave

Validated Members
  • Posts

    153
  • Joined

  • Last visited

Everything posted by scubadave

  1. I had one leak that the hose didn't locate but using the Whisper it was found right away. Sometimes it takes different tools to find the issue.
  2. I have trimmed the line ends and the leaks still remain. I have checked the price of new guages, $275 for the rear and $300 for the front. Will try the cleaning and dielectric to see if that helps. Thanks for the suggestions.
  3. Yes the air lines were removed as the cluster was on the bench. The collet freely turns and my flavor of slick'um was applied.
  4. Once again I tried to remove the collet and was unsuccessful. Either I need to eat more spinach 😋 or someone else will have to do the job as pulling straight up with the needle nose pliers is not working for me.
  5. I tried pulling the gromet out with needle nose pliers but was afraid of damaging the gauge or the fitting with the amount of pressure needed.
  6. In my 99 VNL 610, tracked down some of my air leaks to the connections behind the guages in the dash cluster. Removed the air lines and tried to take the push to connect fitting apart to put in a new o ring but was unable to get it apart. Is there some trick to get the old o ring out without damaging the guages?
  7. scubadave

    Air leak help

    Thanks so much for all your help. Scrap; First noticed last spring and as I said above I took it to a dealer and they were unable to resolve this, they did replace a couple of parts. After having the truck with them for about 2 weeks I had to leave without the issue resolved, since they had no idea.
  8. scubadave

    Air leak help

    1999 Volvo VNL 610 with Cummins N14. Air gauge in dash marked F goes down faster than the other one marked R. Reading goes down to about 105 and stays there then the other guage starts going down, when it reaches 105 compressor kicks in and builds up both to 120. Cycle takes about 5 minutes from compressor start to compressor start. No love from a dealer recommend as one good at dealing with air leaks by a professional driver. Planning on ordering a Wisper to assist me with tracking down any air leaks I can. Since the connections are most likely original I believe I may be better off replaceing the PTC connections. What size connections do I need? Are there Amazon or NAPA part numbers? Thanks Dave
  9. On the HHRV Campground site I do not see Jim and Mary's listed. Perhaps one of you could submit it? Thanks.
  10. Emerald Cove (Earp, CA) resort space 271 until 10-24-12 then on to Benson, AZ.
  11. Not exactly Tucson but we are in the Saguaro Co-Op in Benson. About 40 miles east of Tucson. Will be here until mid April. Dave
  12. Currently at Arrowhead RV Park in Cascade, ID. Lovely place with a few trees and a river just one row away. Dave
  13. Settled in for a while at Saguaro Coop in Benson, Az. Perhaps will see some of you if you stop by the park during your travels. Dave
  14. At Beachside RV Park in Birch Bay, WA for the summer. Just a few minutes south of the Canadian border in western Washington. No room left for anyone to stay but if passing through perhaps we can meet.
  15. Currently in Mount Vernon, WA taking care of family business. Be here until the 28th and then a few miles up the road for the summer at Birch Bay, WA. Dave
  16. Settled in for about the next five months at the Panhandle Pioneer Settlement in Blountstown, FL. Temps have been 60 at night and 85 days. Suppose to cool off big here to 55 nights and 80 days. It will be tough but we will make it. Dave
  17. Jack: Got room at Tom Sawyer for another HDT? Or are you leaving there soon? Plan to be there tomorrow night for one night. Dave and Diane
  18. Currently at Cedar Valley RV Park and Golf in Guthrie, OK, space D-5. About 30 miles north north west of OKC. Will be here for a month. Anyone in the area or passing through feel free to stop by. Dave
  19. Sitting at Village of Trees RV park in Declo, ID and in pulls a 770. Went out and meet RUN2. Enjoyed a few minutes of conversation. We are heading east from here. This is a nice park and has plenty of room for us HDT's. Its on exit 216 of I-84. Dave
  20. We are in Hi Valley RV Park in Eagle, ID. We will be here until July 2 so anyone in the area feel free to drop by and say Hi. Dave
  21. Just arrived at Saguaro SKP Co-op, spot 299. Her for at least a week. Dave
  22. After leaving Gila Bend last Sunday we went to Why, AZ for 3 nights (small park on the reservation behind a very small casino) then on to RoVers Roost and spent the night boondocking. Moved the next day to site 84 and will remain there unilt the moring of the 15th. Then it will be on to Tuscon/Benson area for a week or so. Dave
  23. Pam: That was probably me. I was busy watching the agent waving at me to make sure he was out of the way. I did see a couple other HDT's heading west during my time on I-8. Dave
  24. I am currently at Augies RV Park in Gila Bend. Had two trailer tires blow on I-8 Heading east from Yuma so I am here waiting for some new tires to come in so I can have new tread all the way around. Minor damage to the rig. Am attempting to contact Goodyear about their tires and the damage. I will be here at least another week as the local tire shop said they would have the tires by Thursday at the latest. I did not want to go any further with two possible weak tires. Dave
×
×
  • Create New...