Jump to content

Sparky242

Validated Members
  • Content Count

    49
  • Joined

  • Last visited

About Sparky242

  • Rank
    Full Member

Optional Fields

  • SKP#
    147473
  • Lifetime Member
    No

Profile Information

  • Gender
    Male
  • Location
    Duluth Mn
  • Interests
    Sprint car racing, Camping

Recent Profile Visitors

5,127 profile views
  1. I tried that on my Gen 1 and it didn't work, I don't know if there is a way to do it or if that started with the Gen 2 trucks Thanks Stan
  2. I have about 8 inactive codes and wanted to know if I can clear them myself or do I have to go to the dealer
  3. does holding the enter button down work on Gen 1 trucks too?
  4. Yes I use it, it is a great resource. I use my windows lap top. Thank You Mark
  5. Sparky242

    Making the Jump

    Nice looking truck, you will be very happy with it. I haven't found one thing I don't like about towing with an HDT, besides its just plain fun Congrats
  6. I think I fixed my ac problem in the sleeper and thought I would pass along what I found. My sleeper heating/cooling control is a potentiometer, so I removed it, sprayed it with electrical contact cleaner and worked it back and forth a bunch of times, put it back in and now I have cold air in the sleeper. Hope this might help someone else down the road
  7. Thank You should have remembered the resource guide, I have used it many times
  8. Thanks for the info, Charged it last summer, had to recharge it this week added 2 lbs Shrader valves on the both low and high side were leaking, I thought I found the leak guess I will have to dig deeper Thanks Stan
  9. Hi All I have a 2000 Volvo 610 last summer my sleeper blew nice cold air but on heat it still blew cold air, that was ok. This summer it blows hot air when on cold or hot temp setting, not ok. Don't know where to start looking or and I missing some thing simple. Thanks Stan
  10. Randy thanks for the info this is definitely on my project list. Back in the early 90s I put a Lambo kit on it and always wanted to upgrade the power plant
  11. I needed a piece of metal skirting to cover the hole where my fold out steps where and I went to the local RV dealer and they had a lot of left over metal skirting from different repairs they have made. I picked thru what they had and found a piece that worked perfect, cost was reasonable
  12. I have a 1986 Pontiac Fiero with the 2.8 motor and I always wanted to do a engine swap to a 3800 and was told that you need a hoist to lift the car off the engine cradle ( engine comes out the bottom) since you have done this I figured you would know if it can come out the top or not. Thanks
  13. Sparky242

    Air Tank Valves

    Thanks for the info I also have a Detroit so maybe it was a normal amount of oil, I will keep an eye on it for sure.
  14. Sparky242

    Air Tank Valves

    Thanks for the info I will check it more often
×
×
  • Create New...