Jump to content

14ukden&bev

Validated Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by 14ukden&bev

  1. Sir sorry for the delay. The frame is a LCI and there is a 3/4"+ (I have done the string test) going up into the the coach at the front axle instead of a frame camber going towards the road it is in the kitchen at the fridge. I have a company in AZ that will pull the frame back down and reinforce it for me. I also had the wall at the rear end of the slide come down past the floor line by 1.00 inch and LCI came down and added new gussets to lift the wall up to what should be the right place. I think this long overhang from rear axle is a problem bad design . Den.
  2. We now own a 2017 per owned LM 365 Arlington after a Everest for years, but I just found out a few months ago that the frame is bent going upwards into the coach. I have been looking for a frame shop to pull it back down to spec then I would think to sister weld plate to hold it in place. but with no luck. It was suggested to me about adding a third axle, I still want pulled down ..one company said about the overhang of these coaches causing the back end bouncing. Also told they can not get the equipment over the top of I beam for a pull down as the floor is screwed down to I beam. What do you reckon? Den.
×
×
  • Create New...