Jump to content
Wrknrvr

Building a muzzleloader rifle

Recommended Posts

  Just curious if anyone has ever built one of these. I finally got out a stock I started and 40 years ago and have started making parts for it.

 

   Vern

 

Share this post


Link to post
Share on other sites

  So this is photos of my project.

IKrjXwml.jpgKCs2uzTl.jpg

IKrjXwml.jpg

 I bought the barrel, lock and triggers. And a block of tiger maple wood.

 

 The small parts I made by hand on the back of my truck.

 

 40 years int the making,   Vern

Edited by Wrknrvr
Mist photo

Share this post


Link to post
Share on other sites

That's a really cool project, Vern. I've contemplated black powder, but I don't have 40 years to stretch out the build. I may have to buy ready to shoot. 

Share this post


Link to post
Share on other sites

  With working and getting married some things took the back burner.

 

 So that silver colored object is a cast zinc end cap. It’ was done in the lost wax casting process. Now that took three attempts at it to produce that piece. Never did wax casting process before. Still a lot of finishing by hand to make it fit. The metal piece near the camera was made out of steel tubing. It is for where the ramrod enters the stock. The wide end was hammered out of the round tubing and then the two pieces where silver soldered together.

 

  This is an attempt to reproduce a Hawken rifle the way it was made in 1840 or there about. Only hand tools where used mostly. I guess any electric tools would be called cheating by some. Ok I cheated a little.

 Now Youtube is very helpful for this project. And the net helps a lot also. Before the net you hand to find a rifle in a museum for a real idea what you wanted to do. So traveled from Pa to Colorado to see one or two examples. That image is long gone.

  Lots of different things to consider when building a rifle as such. With retirement getting close I am thinking of getting a forge for making some parts this summer also. I do want to try and cast some German silver parts this summer for the next rifle. It will be made with a applewood stock. Yes the applewood stock is 40 years old also.

 

note to self—— do not try to carve 40 year old wood     It seems like it got hard over time. Or I am weaker.

 

 Boredom is fading,   Vern

Share this post


Link to post
Share on other sites
8 hours ago, Wrknrvr said:

Lots of different things to consider when building a rifle as such. With retirement getting close I am thinking of getting a forge for making some parts this summer also.

When our daughter was learning blacksmithing she bought a "small" anvil. I would not want to carry that in an RV. :)

Linda

Share this post


Link to post
Share on other sites

Once you get to the finishing stage, I would recommend a "browning" metal finish rather than bluing. It will not rust (almost). Looks good with any wood finish you might like.  If you use any brass hardware it will not take long for it to get the tarnished look if you don't mess with polishing it.  Deer will spot the bright work from a lot farther off than you might imagine. (Don't ask how I know). I think a .50 caliber is a fair selection for most tasks although some really like the .54 caliber.  Good luck with your project.

Catfish

Share this post


Link to post
Share on other sites

  So this end cap was shaped out of wax three times and then each attempt was covered in plaster of Paris. Then they needed heated to melt out wax and dry mold out. First mold fell into pieces as it was heated. Second attempt was poured in lead. As a test. What you see is the sorta good one. Note to self —— take your time to carve it out of wax correctly. Zinc is hard to shape compared to wax.

KOpF3Lll.jpg

 

 So I never tried the lost wax casting process before.  

 

  So I needed to fix a boo boo in the casting. So with solder gun I made an attempt to fill two small defects.    O no when zinc melts it seems to not behave very good. So I get the idea to fill void with silver solder. Needed to apply a little heat with a torch. Sparingly apply heat with solder gun and torch. It worked.

  But now to shape the new material....... it is hard. In sunlight it has a yellow tint to it.

 

 This sorta eliminates some boredom.,   Vern

Share this post


Link to post
Share on other sites
On 1/19/2020 at 2:22 PM, sandsys said:

When our daughter was learning blacksmithing she bought a "small" anvil. I would not want to carry that in an RV. :)

Linda

Vern’s rv can carry an anvil. 

Share this post


Link to post
Share on other sites

  So here is the difference in casting something not very accurate. The small piece is my last casting. It was fairly accurate in size. The other one was a hurry up wax shaping that was over size. I new that, so I made the third wax model.

 I was casting some bullets so I just poured that second mold and you can see my results are.

  The lost wax casting process involves shaping the item in wax. Then imbedding the wax model in plaster of Paris. Then you let it cure. Then heat the mold to melt the wax out and continue heating the mold . Then pour the molten casting metal into the hot mold.

 

pBFMtRUl.jpg

 

 I have wanted to do this for long time. Finally getting to it. I may have started my buckitlist 40 years ago. It is interesting to try new things.

 

  

Share this post


Link to post
Share on other sites

Nice work. As an aside; In Williamsburg, Va, the armory manufactures 18th century rifles. Just as done near 300 years ago. When I was visiting I could have ordered one made for delivery 3 to 5 years later. Something like $12,000.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...