Jump to content
gooddog68

99 Onan Emerald plus 4000 no load to camper

Recommended Posts

On my last trip, while running AC on generator, it blew a bearing.   What a noise.   A local mechanic removed, fixed and replaced the generator.   It runs great when started from the generator itself.   But when I started it from inside the camper, it ran very rough and did not beep to let me know it was ready to turn on the AC.   No other electric items come on either.  He has not been able to find the problem yet.   Gasoline is good, Converter appears good.   Any ideas?

Share this post


Link to post
Share on other sites

Welcome to the Escapee forums! 

To me it sounds like something is wrong with the connections to the remote start controls. They are just a duplicate of what is physically on the generator set and are optional to have. If they took the generator set out of the RV to work on it, they also had to have disconnected those controls. I'd only be guessing about what it is doing but I'd first try disconnecting it and reconnecting it as it should be just a plug in connection. Make sure that both male and female plugs are clean and solid.

 

Share this post


Link to post
Share on other sites

I mean the wires from the generator to the camper/remote start. If it's only from the remote that you have problems check the wiring from there to the genny.

 

Share this post


Link to post
Share on other sites

Well, all fixed.   One problem was the air/mixture needed adjustment.   To much air in line.   Also fixed a couple of wire connections.   Thanks everyone for your suggestions.    Marcia

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...