Jump to content

Bert2

Validated Members
  • Posts

    27
  • Joined

  • Last visited

Optional Fields

  • SKP#
    131310
  • Lifetime Member
    No

Profile Information

  • Gender
    Male
  • Location
    Manitoba Canada
  • Interests
    fishing, quadding, camping

Recent Profile Visitors

625 profile views

Bert2's Achievements

  1. It appears according to the workhorse parts site the clutch part number is W0000193 but they have no stock.
  2. I have a 2004 Class A Gulfstream Sun Voyager on the Workhorse chassis with the 8.1 gas engine. I was on a trip 5 weeks ago and the mechanical fan clutch failed. I had a new one installed, NAPA part number 271620. Four weeks later it has failed. Wondering if I got the right fan clutch. Anyone changed theirs recently and could share the part number of theirs?
  3. Bert2

    12V charge line

    I am a new owner of this coach having bought it last fall. I have just found out there is no wire going to the charge terminal so I will have to run a charge wire to the rear plug from the front of the coach.
  4. Bert2

    12V charge line

    Yes a Workhorse W22 chassis. I have a fuse panel under driver dash and one under hood but don't see a fuse labelled for the 12V charge line.
  5. Bert2

    12V charge line

    I have a 2004 Gulfstream Sun Voyager 8368 MXG. I have no power to the 12V charge line at the plug on the back of the motorhome. I do have the engine running in case it is controlled by the ignition switch. Can anyone tell me which fuse box to look in or if it is a resetable breaker (with location). I have been unable to locate it so far.
  6. I found the tripped breaker. It is in the front storage compartment / luggage door on the driver's side. Step is working properly now.
  7. Correct. Door position switch has not moved. I checked the fuse box under the hood but did not see any burnt out fuses.
  8. Update. I have driven 2000 miles so far and the nuts are staying tight for the left rear wheel cover.
  9. Looking for the fuse or breaker for the electric steps. They went out/in when I stepped out for a minute but wouldn't come out when I went to get back in. I want to check the fuse or breaker but am having trouble locating it.
  10. I am changing from a fifth wheel to a Class A and towing my SUV. I have it all set up to tow but not sure what to do about tire pressure monitoring. On my fifth wheel I installed steel valve stems for the tire monitoring pressure sensors. My SUV has its own tire monitoring sensors inside the tires but the valve stems on them are rubber so my external sensors would break the rubber valve stem eventually. My GM dealer showed me a metallic valve stem (grey in color) but advised GM quit using them due to leaks where it threaded together and the valve caps seizing on the valve stems. Any ideas or suggestions? My toad is a 2013 GMC Terrain AWD and is on the approved list for flat four towing.
  11. Update on the second temperature guage. It is engine temperature. Guess a previous owner decided it was cheaper to install a second guage than to repair the one in the dash cluster.
  12. How do I find the SKP members who allow the free parking on their property. I can't figure out how to search it. I have posted below what I saw on the Escapees website. Overnight Parking With SKPs SKPs is a friendly acronym used to refer to members of Escapees RV Club. Many SKPs own property across the country where they welcome fellow members to stop for a night or two. These sites are often free, or available for a small fee, and the listings are only available to Escapees members.
  13. Update: The second garage had a senior mechanic pull the left rear wheels off and do an inspection. He found a cracked brake rotor. This could have serious implications if it broke so I am proceeding with doing a brake job next week. The mechanic's thought is there may have been some vibration from the cracked rotor. I will keep you posted if it solves my problem in the future.
  14. I just bought a new to me Class A and am having trouble keeping the two nuts tight that hold on the stainless steel wheel cover on my left rear dual. Any suggestions on how to keep them tight and why they won't stay tight? The first time I thought the place that put the new tires on did not tighten them sufficiently. Second time it was after a different garage did a brake check and balanced my tires. Only thing in common is the wheel position.
  15. Looking at the above washer dryer combo. I also understand it was sold under the Demco. Have a chance at a good price and wonder if anyone has one or knows how they compare to a Splendide.
×
×
  • Create New...