Jump to content

1000.2 Western & Eastern Arc Install Instructions


Zulu

Recommended Posts

 

Thanks. This is part of my 1000.2 EA & WA Install Instructions that I scanned -- but yours is much smaller in size as it wasn't scanned. Perfect.

 

This the EA and WA chart for both the 1000.2 and 1000.4.

 

Only the WA settings are the same for the 1000.2 and 1000.4.

 

The EA settings are not the same. But that makes sense as the 1000.2 uses a Twin-LNB while the 1000.4 uses a triple.

 

Here are the 1000.4 EA and WA settings.

SKP #79313 / Full-Timing / 2001 National RV Sea View / 2008 Jeep Wrangler Rubicon
www.rvSeniorMoments.com
DISH TV for RVs

Link to comment
Share on other sites

According to Dish, you do use the same settings for an DPP 1000.2 EA dish as a DPP 1000.4 dish.

 

Despite the DPP 1000.2 EA has only two LNBFs, the two LNBFs are on the same Skew alignment as the triple LNBFs on the DPP 1000.4 EA.

 

The Elevation and the Azimuth are the same for the primary LNBF which is what you are aiming.

Please click for Emails instead of PM
Mark & Dale
Joey - 2016 Bounder 33C Tige - 2006 40' Travel Supreme
Sparky III - 2021 Mustang Mach-e, off the the Road since 2019
Useful HDT Truck, Trailer, and Full-timing Info at
www.dmbruss.com

Link to comment
Share on other sites

 

Nice! How long has this EA triple been around?

 

It's been around for at least 5 years anyway. When I was first deciding between a 1K2 and a 1K4 dish for portable RV use back in 2011, one of my criteria was that triple LNBF's for both arcs had to be available, and they were for both dishes. My decision to go with the 1K4 was based on the slightly larger dish and a mount that was easier to aim and easily adapted for a no tools setup.

Dutch
2001 GBM Landau 34' Class A
F-53 Chassis, Triton V10, TST TPMS
2011 Toyota RAV4 4WD/Remco pump
ReadyBrute Elite tow bar/brake system

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...