Jump to content

alan0043

Validated Members
  • Posts

    1,742
  • Joined

  • Last visited

Optional Fields

  • Lifetime Member
    No

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    canton,ohio

Recent Profile Visitors

12,388 profile views

alan0043's Achievements

  1. Hi Al. Where ya been ! We dearly missed you at the 2022 ECRΒ  Cal me when you get timeΒ  Β 419-466-5984

    Thanks ol' Buddy !!

  2. Hi Paul, It is so good to hear from you. I hope you and Paula are doing good. It sounds like you have a project going on with the new dog. Sorry to hear about Daisy. Please keep posting. It nice to hear from you. Al
  3. You guys need to take your act on the road. 😎😁
  4. Hi Rotorhead, Don't be afraid to question question. This is how you are going to learn about your truck. This is a good group of guys always willing to help. Also let YouTube be your friend. You can be surprised what you can find. Don't ask me how I know. 🀣 Al
  5. Hi Rick, Sounds like you need to be careful with that drill. You could go for a ride or worse yet, break your wrist. It will be nice to see the finished bed. Keep the pictures coming. Al
  6. Hi CA, Wish you the best in your challenge. I hope your project turns out the way you are hoping for. If you didn't have a DIY'er you won't have a HDT. Please post how things work out. Inquiring minds need to know. πŸ˜ƒ I do have a Jackalope in my truck because it made my life easier. That has been a few years ago when prices were cheaper.
  7. Thanks Dave for the pics. Hopefully next year I can make coffee again for everyone. 😁
  8. Big Al is still in northeast Ohio. I hope someone stepped up and helped Carl with the coffee. I did miss all of you folks. 😎 I hope next year things will be back to normal. Is there a post rally going on ?
  9. Remember the old saying, " If you don't have pictures, it didn't happen " . 😁
  10. Hi Everyone, Came across this video from The Timken Co.. I thought it could be helpful. The video is just for helping someone out.
  11. Hi Dutch, Thank you for the heads up. I was hoping that the sensor would unscrew like the 507.
  12. Hi Dutch, I got a hold of TST over a year ago or more about what kind of deal they could work out with me about my old 510 sensors. As it turned out it was cheaper for me buy a new system. I also find out that buying a system from TST direct is not the best deal either. I don't believe that the security cap make the sensor weather proof. I was hoping the internals of the 510 look like the 507 sensor.
  13. Hi Ray, I be interested in knowing what you find out. The big question is, where is the best place to start a cut. Knowing me, I would pick the wrong place. πŸ˜„ I was thinking about starting a cut at the very top of the sensor. Hoping there would be room between the security case and the sensor itself. Another key would to be writing down the code of that sensor and make your own code to sensor part that is left.
  14. I took a picture of my card after I received my 2nd shot from the advice of a nurse. This was over a week of ago.
×
×
  • Create New...