Jump to content

chevy3500

Validated Members
  • Posts

    87
  • Joined

  • Last visited

Optional Fields

  • Lifetime Member
    No

Profile Information

  • Gender
    Male
  • Location
    wi

Recent Profile Visitors

3,681 profile views

chevy3500's Achievements

  1. Thanks Scrap and Darryl. I've been on vacation so haven't looked at it much, did take the switch out but didn't see any obvious issues. Its a small module with 4 micro switches, (2,4,6 cylinders and off) can hear them clicking on and off, I know that don't mean anything, but maybe with the Scraps manual I can test it. Did attempt hitting switches repeatedly, as you suggested but no luck, Darryl. Before starting to pull things apart, where is the electronics module located? under dash or on steering column. Thanks again!
  2. FYI the cruise seems to work fine, "The power signal appears to be getting through, as the dash indicator. indicates." quote from Daryl, but dash indicator doesn't come on.
  3. Thanks, I'll check out those possibilities
  4. 2000 Kenworth t2000: My engine brake wont activate, switches are on steering wheel (smart wheel) and has indicator lamp on upper dash. Neither the light or actual engine brake will work, any one know where to start looking? could not find a fuse that that was labeled for it in fuse box, there is a relay labeled "ABS engine brake" but replaced that with known working relay and no change. This seemed to quit working while driving and had been working fine. Any help would be appreciated Thanks!
  5. Do you have a source for that?
  6. Thanks! I was wondering if that was a possibility. Just used over the counter unions (dot).Did you silicone them in when you had them in place?
  7. Does any one know the part number for airline pass thru on drivers side firewall of "2000" Kenworth T2000 or if repair parts are available. There is two snap in blocks each having 4 air lines ( 2-3/8", 1- 1/4" and an 1/8" line) I have removed line and cut off and cleaned the end of it but sill leaks. Thanks!
×
×
  • Create New...