Jump to content

Hewhoknowslittle's VNL610 bed build


Hewhoknowslittle

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Looks good!! How do you like the Milwaukee saw? Picked up one about 2 weeks ago for $90 used, the blade is starting to get worn out, but heard the original blade is not great anyways.

2006 Volvo 670 singled long

2011 Heartland Sundance 3300CK

2006 Smart passion

2001 F350 DRW CREWCAB

Link to comment
Share on other sites

I've had one of those saws for years. Absolutely love it. Blades are expensive, but my local hardware store carries a less expensive, same quality, alternative.

 

A word of caution though, use a good extension cord. Wimpy cords will shorten saw motor life.

KW T-680, POPEMOBILE
Newmar X-Aire, VATICAN
Lots of old motorcycles, Moto Guzzi Griso and Spyder F3 currently in the front row
Young enough to play in the dirt as a retired farmer.
contact me at rickeieio1@comcast.net

Link to comment
Share on other sites

Looks good? How do you like the Milwaukee saw? Picked up one about 2 weeks ago for $90 used, the blade is starting to get worn out, but heard the original blade is not great anyways.

 

 

Love it, I have cut all the flat steel on the bed with it except the wheel cutouts, and it cuts like butter. Just wear eye protection as it does throw a lot of chips.

 

I've had one of those saws for years. Absolutely love it. Blades are expensive, but my local hardware store carries a less expensive, same quality, alternative.

 

A word of caution though, use a good extension cord. Wimpy cords will shorten saw motor life.

 

Yes, I have a 10 gauge extension cord I use, if not the breaker on the saw will trip.

We had one before this one and loaned it to a friend, gave him the good extension cord but the saw came back burnt up, i asked him if he used our extension cord.

Well, it was too short, I needed 200 feet so I used the little orange cords hooked together, and your saw sucks!!

Lesson learned, if you need to use my saw, go buy your self a saw.

 

Roger

GCTaaehl.jpg

Link to comment
Share on other sites

Man that is looking nice. I just bought one of the Milwaukee deep cut portable band saws after using one at the HDT rally. Can't wait til warmer weather to get my welding gear all set up. Don't worry about the savings account. It's only money, they print more every day ;)

2006 Volvo 780 "Hoss" Volvo D12, 465hp, 1650 ft/lbs tq., ultrashift

Bed Build by "JW Morgan's Custom Welding"

2017 DRV 39DBRS3

2013 Smart Passion Coupe "Itty Bitty"

 

"Don't go around saying the world owes you a living. The world owes you nothing. It was here first!"

Link to comment
Share on other sites

 

 

Love it, I have cut all the flat steel on the bed with it except the wheel cutouts, and it cuts like butter. Just wear eye protection as it does throw a lot of chips.

 

 

Yes, I have a 10 gauge extension cord I use, if not the breaker on the saw will trip.

We had one before this one and loaned it to a friend, gave him the good extension cord but the saw came back burnt up, i asked him if he used our extension cord.

Well, it was too short, I needed 200 feet so I used the little orange cords hooked together, and your saw sucks!!

Lesson learned, if you need to use my saw, go buy your self a saw.

 

Roger

Thanks!

 

Bed build looks great! Will be following the build. I like the hitch too.

2006 Volvo 670 singled long

2011 Heartland Sundance 3300CK

2006 Smart passion

2001 F350 DRW CREWCAB

Link to comment
Share on other sites

Home Depot had this saw for $299 last year. As I've often found, Amazon, while convenient, is way to expensive.

 

I can go to my local hardware store, not big box, and buy for less than Amazon, every time. And if there's an issue, I get service, not a reply to send it back and wait. End of rant.......

KW T-680, POPEMOBILE
Newmar X-Aire, VATICAN
Lots of old motorcycles, Moto Guzzi Griso and Spyder F3 currently in the front row
Young enough to play in the dirt as a retired farmer.
contact me at rickeieio1@comcast.net

Link to comment
Share on other sites

LOOKING GOOD ROGER

 

BTW, are ya gonna have it ready for next years rally? IF not, I can come get your trailer so you don't have to strain that mis-marked LGT anymore. That turbo was screaming so loud ya woke me up from my nap last year :P:D:P

MY PEOPLE SKILLS ARE JUST FINE.
~It's my tolerance to idiots that needs work.~

2005 Volvo 780 VED12 465hp / Freedomline transmission
singled mid position / Bed by Larry Herrin
2018 customed Mobile Suites 40KSSB3 

2014 smart Fortwo

 

 
 
Link to comment
Share on other sites

LOOKING GOOD ROGER

 

BTW, are ya gonna have it ready for next years rally? IF not, I can come get your trailer so you don't have to strain that mis-marked LGT anymore. That turbo was screaming so loud ya woke me up from my nap last year :P:D:P

 

Well, I got to admit it but that was planned. She does scream on WOT don't she!!

Yes, I will have her done, and am planning on going to the ECR with it. If things work out I will attend the truck show in Lewisville, then head to Crossville for some show and tell.

I do thank everyone at the Hutchison rally for letting me bend there ear on beds, and taking pictures to plan mine.

I have over built the bed as I am one to overload what ever I have, including the LGT. :wub:

 

Roger

GCTaaehl.jpg

Link to comment
Share on other sites

Holy Heck that looks a bit dangerous! I have a Dewalt Carbide Chop Saw that I Love but I'm not sure I'd want a Circular Saw.

 

You can get the blades resharpened and/or have individual carbide teeth replaced.

 

I wanted the chop saw but Milwaukee discounted them last year.

It really cuts like butter, I have not checked into sharpening the blade, but will.

 

Roger

GCTaaehl.jpg

Link to comment
Share on other sites

Roger,

Have to stop that turbo screaming because Phil really needs his beauty sleep.

Brad and Jacolyn
Tucker the Wonder dog and Brynn the Norfolk Terrier
2009 Smart "Joy"
2004 VNL630 "Vonda the Volvo"
2008 Hitch Hiker 35 CK Champagne Edition
VED12 465 HP, Freedomline, 3.73 ratio, WB 218"
Fulltiming and loving it.

 

Link to comment
Share on other sites

Dr. Pepper doesn't help my looks but does help me be a little less grumpy when my napping is interrupted :)

MY PEOPLE SKILLS ARE JUST FINE.
~It's my tolerance to idiots that needs work.~

2005 Volvo 780 VED12 465hp / Freedomline transmission
singled mid position / Bed by Larry Herrin
2018 customed Mobile Suites 40KSSB3 

2014 smart Fortwo

 

 
 
Link to comment
Share on other sites

I don't mean to hijack Roger's thread but Dublin no longer bottles any Dr. Pepper products and hasn't for 3 years. They were forced to quit after their following grew too large and Dr. Pepper claimed that they were in violation of their contract. There are other bottling companies that are now bottling limited quantities of the "original" recipe (but made with beet sugar and not real pure cane sugar) but they are hard to find in my part of Texas

MY PEOPLE SKILLS ARE JUST FINE.
~It's my tolerance to idiots that needs work.~

2005 Volvo 780 VED12 465hp / Freedomline transmission
singled mid position / Bed by Larry Herrin
2018 customed Mobile Suites 40KSSB3 

2014 smart Fortwo

 

 
 
Link to comment
Share on other sites

I don't mean to hijack Roger's thread but Dublin no longer bottles any Dr. Pepper products and hasn't for 3 years. They were forced to quit after their following grew too large and Dr. Pepper claimed that they were in violation of their contract. There are other bottling companies that are now bottling limited quantities of the "original" recipe (but made with beet sugar and not real pure cane sugar) but they are hard to find in my part of Texas

Bummer!

Link to comment
Share on other sites

Nice job piercing the channel for the cross tubes. That'll pay dividends right quick. I'd have preferred to grind the mill scale off of the channel and tubing before laying the tubes into the channel, but this is not my build. Looking forward to next progress report.

I am planning on media blasting the bed before painting it.

Using POR-15 in semi black on the undersides and silver in the tool boxes to brighten them up.

Bed liner on top and bumper area.

GCTaaehl.jpg

Link to comment
Share on other sites

I am planning on media blasting the bed before painting it.

Using POR-15 in semi black on the undersides and silver in the tool boxes to brighten them up.

Bed liner on top and bumper area.

 

Sorry, I was referring to the weld quality of including the mill scale vs. removing it. My bad.

But looking forward to the progress. Are you going to spray the liner or have it done? If you do it, I'd like to learn more about the brands and cost of the stuff you use please.

I'm a work'n on it.

Link to comment
Share on other sites

Nice build looks like it's going great, we will be adding to our already done bed this spring. We need to move the hitch back about another 2' 1/2 to 3' more to give us more room for the smart. It had a plywood deck and we removed it and plan on putting 1/4" diamond plate on. We look forward

to more of your progress.

 

Chip

Chip and Ruth

2000 Kenworth T2000 'Titus'

2006 Keystone Raptor 'Cletus'

2010 Smart 'Alyck'

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


RVers Online University

campgroundviews.com

RV Destinations

Find out more or sign up for Escapees RV'ers Bootcamp.

Advertise your product or service here.

The Rvers- Now Streaming

RVTravel.com Logo



×
×
  • Create New...