Hi all,
Let me introduce you to my project. I am currently converting a Kenworth T2000 from an HDT RV to a full blown RV. I have added a 16' box and frame extension done by a professional company in Los Angeles. Here are some specs i am working towards.
Goals -
5 Air Seats in Front Mounted - I removed all the beds and cabinets for this to occur
Front area will have two bunk beds for my boys to sleep once we are parked
Full bath with a full-size shower and larger RV toilet
Full kitchen with a 17” range and cabinets to surround.
Working 120v plugs and 12v plugs throughout for computers etc.
The rear of the box will have a queen bed on a linear actuator and dinette underneath for eating etc.
Specs on the RV:
Water: 180G – Instant Furrion hot water heater
Black: 80G
Grey: 120G
Genset: Either 7500W Onan Diesel OR 4000W Onan Gas
Solar: 2.2KW solar system – 24V 310Ah battery capacity (still finalizing)
Heat/Cool: Minisplit 12k Unit
Fuel: 200G Diesel saddle tanks
Current Status-
All the walls have been framed with metal studs, electrical has been roughed in, plumbing is almost laid out, bathroom has been framed, cabinets are built and awaiting install, aluminum stairs are built waiting to be installed, RV door is installed, dinette has been received finally (6Months) wait, all 5 new seats are mounted, rear rails for queen bed are mounted, front is laid out for the boys, and entire RV is dried in.
As you guys look at my photos, please feel free to make comments, suggestions, questions and I have pretty thick skin, so do not be afraid to say that was “silly” etc.
I will post some photos later today. Sorry for the delay.
My instagram is #toterhomeawayfromhome - it is new so give me some time, this is a side project so some delays in updates.
Should I use google drive to imbed photos, still trying to figure out the best way to share photos. Any recommendations??