cattflight Posted February 5, 2017 Report Share Posted February 5, 2017 I am using the SWiM3 portable antenna with the provided power injector and the HR24 IRD in the RV. I have used this exact setup on the road while we had a few IRDs left behind at the house. We just transitioned to full time and established a new physical address with DirecTV and they confirm all IRDs are still authorized. This is also the first time I had to re-aim the dish to new parameters. But I am certain that it is aimed correctly. I continue to get the 771 Signal Loss error despite all my troubleshooting. I confirmed voltage out of the power injector all the way to the end of the 50' coax at the LNB. I've reset the receiver twice. Unplugged and repowered it 3 times. Did the Satellite Dish Setup multiple times still no luck. What's interesting is the menu for Sat a Dish Setup limits the Setup selections when the SWM is connected. But when it is disconnected, I can adjust everything entry on the page. With the SWM connected, it automatically selects SWM LNB8 CH as the switch type. Is that correct? Without the coax connected I can find LNB and SWM only. So my last question is....can the LNB itself have gone bad? The dish took a tumble in the wind once but it wasn't a hard drop. Just sort fo fell over. It's the only thing left in the troubleshooting I can't confirm without ordering a replacement. Link to comment Share on other sites More sharing options...
Ronbo Posted February 5, 2017 Report Share Posted February 5, 2017 You can still call DIRECTV and have a technician come out to service it. He/she will tell you exactly what you are doing wrong. Ron C. 2013 Dynamax Trilogy 3850 D3 2000 Kenworth T2000 Optimus Prime Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.