lockmup68 Posted June 16, 2017 Report Share Posted June 16, 2017 Quadra is saying they are scheduling in August now for install. Anyone know where I can get Bigfoot leveler installed on the Teton between now and July 10? Also needing windows installed on the truck in the sleeper and a few wiring things. I'm in middle TN, so can go pretty much anywhere except west coast. Work super busy for me now, so I'll need to hire out. Thanks and have a great day, Shannon 2003 International Eagle 9200i, Cummins ISX, Freedomline 2007 Teton Scottsdale XT4 Link to comment Share on other sites More sharing options...
lockmup68 Posted June 17, 2017 Author Report Share Posted June 17, 2017 Any help? 2003 International Eagle 9200i, Cummins ISX, Freedomline 2007 Teton Scottsdale XT4 Link to comment Share on other sites More sharing options...
Big Greg Posted June 17, 2017 Report Share Posted June 17, 2017 Quadra does good work,has access to all the parts, and experienced workers. If you can't go to White Pigeon ask them for installer recommendation. Greg Greg & Judy Bahnmiller Class of 2007 2014 F350 2007 HitchHiker Champagne Both sold 2/19, settled in Foley, AL after 12 years on the road http://bahnmilleradventure.blogspot.com/ Link to comment Share on other sites More sharing options...
lockmup68 Posted June 17, 2017 Author Report Share Posted June 17, 2017 from above: "Quadra is saying they are scheduling in August now for install." They said come back in August, I was going to take it to MI. They declined to recommend a dealer who could do it sooner and said come back later. I am going to call again Monday and beg some more. 2003 International Eagle 9200i, Cummins ISX, Freedomline 2007 Teton Scottsdale XT4 Link to comment Share on other sites More sharing options...
WeBeFulltimers Posted June 17, 2017 Report Share Posted June 17, 2017 I would check out the Lippert 6 Point Hydraulic Leveling System. Ours has operated without flaw for almost 6 years of full time use. I NEVER beg anyone to take my $ ! Fulltiming since September 1, 2010 2012 Ford F-350 PSD SRW Lariat Crew Cab 2012 Montana 3585SA Link to comment Share on other sites More sharing options...
DJohns Posted June 17, 2017 Report Share Posted June 17, 2017 Has anyone ever needed quick repair work on a quadra? If an install is that far out how far out is repair? I "used to have" a motorhome with a leveling system failure. When I called for service they said they would get back to me. When the slide is out that doesn't work. Just wondering about quadra. 2002 Beaver Marquis Emerald C-12 Cat 505 HP 2014 Volvo 630 D-13 I Shift SOLD 2017 New Horizons SOLD Link to comment Share on other sites More sharing options...
GR "Scott" Cundiff Posted June 17, 2017 Report Share Posted June 17, 2017 We were at White Pigeon earlier this week. Our install took a day and a half. I lost count of how many new rigs were there for scheduled installs - a lot. In addition there were three people there for installs. We also saw a couple of people come in for repairs, they were out the door in an hour or two. I'm guessing they are busy most of the time, but especially during the spring and early summer. Our "Here and There" Blog 2005 Safari Cheetah Motorhome Link to comment Share on other sites More sharing options...
GR "Scott" Cundiff Posted June 17, 2017 Report Share Posted June 17, 2017 Double post Our "Here and There" Blog 2005 Safari Cheetah Motorhome Link to comment Share on other sites More sharing options...
Jack Mayer Posted June 17, 2017 Report Share Posted June 17, 2017 I've had to repair a Bigfoot - on a Sunday. I called, left a message for their "pager carrier" and got a call back within the hour with the workaround. So I would consider that outstanding service. One example, though. Jack & Danielle Mayer #60376 Lifetime Member Living on the road since 2000PLEASE no PM's. Email me. jackdanmayer AT gmail 2016 DRV Houston 44' 5er (we still have it) 2022 New Horizons 43' 5er 2016 Itasca 27N 28' motorhome 2019 Volvo 860, D13 455/1850, 236" wb, I-Shift, battery-based APU No truck at the moment - we use one of our demo units 2016 smart Passion, piggyback on the truck -------------------------------------------------------------------------See our website for info on New Horizons 5th wheels, HDTs as tow vehicles, communications on the road, and use of solar powerwww.jackdanmayer.com Principal in RVH Lifestyles. RVH-Lifestyles.com Link to comment Share on other sites More sharing options...
rdickinson Posted June 17, 2017 Report Share Posted June 17, 2017 An ex Bigfoot person currently out of Lakeland Florida was at the Tampa RV show 3 yrs ago. He works a lot on race cars but still does the installs but charges more. For my Travel Supreme, he recommended a 21k leg at the rear where Bigfoot only went with a 17k leg. He also claimed to not require me losing 1 of 2 propane cylinders at the front left side of my rig. I don't have specific contact info but he pushed the right buttons with me. You'd have to hunt him out. Roger Link to comment Share on other sites More sharing options...
rpsinc Posted June 17, 2017 Report Share Posted June 17, 2017 4 hours ago, WeBeFulltimers said: I would check out the Lippert 6 Point Hydraulic Leveling System. Ours has operated without flaw for almost 6 years of full time use. I NEVER beg anyone to take my $ ! I have both the Level Up and the Big Foot. I will be installing the Big Foot myself on my Newmar Kountry Aire as I am a fabricator and do all sorts of fabrication and installation. I install equipment in warehouses for a living. Too bad OP is so far away, (I'm in So Cal) I could do that install for you. I dont favor the Lippert product mostly because the cylinders are aluminum and where hydraulics are concerned, I would rather have the parts made robustly. Aluminum cylinders in this application dont fit that description. Esp if you should forget to raise them and bend the rod. Replacement cylinders are WAY expensive from Lippert. We have a thread on this very subject. You may be able to find someone with the necessary skills other than Quadra to install the system. Marcel Link to comment Share on other sites More sharing options...
rpsinc Posted June 17, 2017 Report Share Posted June 17, 2017 54 minutes ago, Jack Mayer said: I've had to repair a Bigfoot - on a Sunday. I called, left a message for their "pager carrier" and got a call back within the hour with the workaround. So I would consider that outstanding service. One example, though. See if that happens at Lippert Marcel Link to comment Share on other sites More sharing options...
Big Greg Posted June 18, 2017 Report Share Posted June 18, 2017 We had one rear Big Foot fail to retract while in Utah a few years ago. I called Quadra late in the afternoon and they talked me through troubleshooting and then swapping the up and down hydraulic lines that fixed the problem which never returned. We stopped at Quadra a few months later and had them check it out but no problem found and no more failures. Their phone support is very excellent. Greg Greg & Judy Bahnmiller Class of 2007 2014 F350 2007 HitchHiker Champagne Both sold 2/19, settled in Foley, AL after 12 years on the road http://bahnmilleradventure.blogspot.com/ Link to comment Share on other sites More sharing options...
lockmup68 Posted June 18, 2017 Author Report Share Posted June 18, 2017 Yes. I am going to do Bigfoot. Not a lippert fan for the aluminum reason among others. I understand they are busy, just trying to find solution to my time problem. We are heading to Calgary on July 10. Would really like to have it done before the big trip. Or before our Canadian leg begins on July 20. 2003 International Eagle 9200i, Cummins ISX, Freedomline 2007 Teton Scottsdale XT4 Link to comment Share on other sites More sharing options...
Heavymetal Posted June 19, 2017 Report Share Posted June 19, 2017 Don't use the installer in Weatherford Texas they butchered my RV, but big foot made it good themselves. 2016 Western Star 5700xe (Pathfinder) DD15 555hp w/12 speed automatic 3:05 diffs 2005 Newmar Mountain Aire 38RLPK 2 Great Danes Link to comment Share on other sites More sharing options...
lockmup68 Posted June 20, 2017 Author Report Share Posted June 20, 2017 They recommended a shop in IL nearish STL. Looking good for early July. Will have confirmed tomorrow. 2003 International Eagle 9200i, Cummins ISX, Freedomline 2007 Teton Scottsdale XT4 Link to comment Share on other sites More sharing options...
lockmup68 Posted June 20, 2017 Author Report Share Posted June 20, 2017 good news, I have an appt with TNT RV and generator service in Greenville, IL to get them installed. According to Quadra, they trust these guys to do an install on big 5ver. We shall see. 2003 International Eagle 9200i, Cummins ISX, Freedomline 2007 Teton Scottsdale XT4 Link to comment Share on other sites More sharing options...
HERO Maker Posted June 22, 2017 Report Share Posted June 22, 2017 Pretty sure you would have looked at their dealer list here. Rocky & Sheri Rhoades '01 Volvo 770 2016 DRV Mobile Suites, HoustonHERO Makers Ministry Link to comment Share on other sites More sharing options...
HERO Maker Posted June 22, 2017 Report Share Posted June 22, 2017 On 6/17/2017 at 8:06 PM, Big Greg said: We had one rear Big Foot fail to retract while in Utah a few years ago. I called Quadra late in the afternoon and they talked me through troubleshooting and then swapping the up and down hydraulic lines that fixed the problem which never returned. We stopped at Quadra a few months later and had them check it out but no problem found and no more failures. Their phone support is very excellent. Greg Jim at Quadra is an excellent person for tech support. Has always returned calls pretty quickly and even walked me thru an install when the brain of the system failed and they shipped replacement quickly. Currently have LIppert on the new trailer (not my decision), but I do like the simplicity of the operation of it vs. my much older Big Foot system on the Teton (2005). But I do believe that Big Foot has changed that to be similar now. Rocky & Sheri Rhoades '01 Volvo 770 2016 DRV Mobile Suites, HoustonHERO Makers Ministry Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.