GlennWest Posted April 16, 2017 Report Share Posted April 16, 2017 Ok, guys. Call me lazy or what. It's Easter Sunday and I don't want to pull a tire. As some know my Teton has a Frankenstein axle. 7k with 8k hubs/brakes. It has 16" wheels. I do know it takes a 7/8" socket on studs. Are they 1/2", 9/16", 5/8"? I was going to order disk brake conversion and only find 9/16 or 5/8 studs 2003 Teton Grand Freedom towed with 2006 Freightliner Century 120 across the beautiful USA welding pipe.https://photos.app.goo.gl/O32ZjgzSzgK7LAyt1 Link to comment Share on other sites More sharing options...
Mark and Dale Bruss Posted April 16, 2017 Report Share Posted April 16, 2017 Tapered seat nuts = 9/16" Flat based nuts = 5/8" Please click for Emails instead of PM Mark & DaleJoey - 2016 Bounder 33C Tige - 2006 40' Travel SupremeSparky III - 2021 Mustang Mach-e, off the the Road since 2019 Useful HDT Truck, Trailer, and Full-timing Info atwww.dmbruss.com Link to comment Share on other sites More sharing options...
GlennWest Posted April 16, 2017 Author Report Share Posted April 16, 2017 oh I measured my spare tire. Didn't think of that earlier. The hole is 9/16". That would be 1/2" studs? 2003 Teton Grand Freedom towed with 2006 Freightliner Century 120 across the beautiful USA welding pipe.https://photos.app.goo.gl/O32ZjgzSzgK7LAyt1 Link to comment Share on other sites More sharing options...
Mark and Dale Bruss Posted April 16, 2017 Report Share Posted April 16, 2017 The stud should fill the hole. If the hole is 9/16", then that is the stud size. Please click for Emails instead of PM Mark & DaleJoey - 2016 Bounder 33C Tige - 2006 40' Travel SupremeSparky III - 2021 Mustang Mach-e, off the the Road since 2019 Useful HDT Truck, Trailer, and Full-timing Info atwww.dmbruss.com Link to comment Share on other sites More sharing options...
57becky Posted April 16, 2017 Report Share Posted April 16, 2017 Ours takes a 7/8" socket and they are 1/2" studs, 7K axle. Link to comment Share on other sites More sharing options...
GlennWest Posted April 16, 2017 Author Report Share Posted April 16, 2017 I'll pull wheel off tomorrow. 2003 Teton Grand Freedom towed with 2006 Freightliner Century 120 across the beautiful USA welding pipe.https://photos.app.goo.gl/O32ZjgzSzgK7LAyt1 Link to comment Share on other sites More sharing options...
Alie&Jim's Carrilite Posted April 16, 2017 Report Share Posted April 16, 2017 Just pull 1 lug nut off and measure it. Alie & Jim + 8 paws 2017 DRV Memphis BART- 1998 Volvo 610 Lil'ole 6cyl Cummins Link to comment Share on other sites More sharing options...
GlennWest Posted April 16, 2017 Author Report Share Posted April 16, 2017 Sorry everyone. I went over my Teton manual and the 2003 sales brochure and I do in fact have 3 7k axles with 3 3/8" wide brake drums instead of standard 2", not the 8k drums like some years use. So all I need to do is order 7k with 1/2" studs. 2003 Teton Grand Freedom towed with 2006 Freightliner Century 120 across the beautiful USA welding pipe.https://photos.app.goo.gl/O32ZjgzSzgK7LAyt1 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.