Jump to content

slide out pump problem


GlennWest

Recommended Posts

My slide outs work, no binding or anything like that. They are run with a Dewalt pump. It wants to run after slides are in or out. It will stop after some time. It has stopped running and then start again. Thoughts?

2003 Teton Grand Freedom towed with 2006 Freightliner Century 120 across the beautiful USA welding pipe.https://photos.app.goo.gl/O32ZjgzSzgK7LAyt1

Link to comment
Share on other sites

Mine never has but it also controls all 3 slides. I also have outside controls at pump. I can open bypass valves and operate each slide individually. I would prefer 3 rocker switches.

2003 Teton Grand Freedom towed with 2006 Freightliner Century 120 across the beautiful USA welding pipe.https://photos.app.goo.gl/O32ZjgzSzgK7LAyt1

Link to comment
Share on other sites

Hi Glen,

I have a Teton as well and had the same problem. It turned out to be the inline pump breakers that went bad. I replaced them with an 80 amp re-setable breaker and things are fine. The following year the Trombetta (solenoid) located on the top of the pump motor went bad. Another easy fix. Our Teton has the Lippert hydraulic slide system. If you have Lippert components could have similar parts that need to be replaced.

 

Brad

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...