Jump to content

Cowdog353

Validated Members
  • Posts

    81
  • Joined

  • Last visited

About Cowdog353

  • Birthday April 13

Optional Fields

  • Lifetime Member
    No

Profile Information

  • Gender
    Male
  • Location
    Zavalla,Tx
  • Interests
    Rv travel, ham radio, fishing.

Recent Profile Visitors

3,321 profile views

Cowdog353's Achievements

  1. I have been unable to access the reservation web site. I’ve tried both apple device and Microsoft. Returns stating unable to establish connection to web site. Anyone else have a problem? Thanks Jim
  2. I have tried using the AT&T chat feature with no luck. Are there any magic words to get the codes? Thanks, jim
  3. Depends,. What else is online? Fridge, TV, Hot water heater, battery charger? If none of them on, could be possible. Try turning TV hot water heater or maybe a toaster.The last two should show 8-10 amp additional draws each. Good Luck, Jim
  4. Staying close to base. My plans were to be well on my way to Alaska . Thinking about a Colorado mountain trip to escape the Texas heat. Going slow and looking /researching before I leap. Hope everyone is staying safe, us older folks need to be extra cautious. jim
  5. Is anyone having trouble with the EFS app? TSDlogistics fuel discount program? i have not been able to see any thing when I go to the price locator , show unable to access server and to try again. They had this problem before but I thought it was fixed. Jim
  6. Thanks, I think the latch will work well.
  7. Any tips on keeping doors closed on residential fridge while traveling. thanks, jim
  8. I've used it twice so far and it's on the up and up. Just wish this virus stuff was not happening as I would love to do some traveling. Just read all the info about the program it's not tricky but you need to understand what is offered . I like it and wish that it covered many more truck stops. Jim
  9. One other thing I've noticed is that when it stops I don't think the pump is loading up.The slide just slows and stops. Jim
  10. Yes appears to be squared. Will measure next time to be sure. Thanks again for the reply Jim
  11. Checked fluid level, was ok. Sometimes slide work as it should other times moves for a short distance then slows and stops. I've tried it with other slides in and or out, no avail. After trying several times it will work as it should, still scratching my head. Thanks for all the leads, help. jim
  12. Ahah! Never crossed my mind. Thanks will give it a check. thanks jim
  13. I have a 2008 Excel 5er. The kitchen slide is getting more and more difficult to extend "out". The bedroom and living room slides work well along with the landing gear. When I try to extend the kitchen slide I sometimes have to switch between in and out before it travels the intire length. The hydraulic pump runs ok. When it starts to move out it may move a foot or so then stop, the pump continues to run. I do not see and obstruction or binding being a problem. Eventually the slide extends out the way it should, but it may take several attempts. I have never worked on this type of system. Any ideas. I am thinking maybe a solioid or valve not opening completely? Any sugestions? thanks Jim
  14. Other things to consider about number of channels you are recieving. The gain of the antenna does make a difference, interference from other devices, obstructions such as trees and buildings. One factor could be the number of connections between antenna and the TV, each connection loses about 1db of signal strength. Finally the difference in brands of TV' s will do a better job of amplfiling the signal. Lots of variables to consider. Hard to compare apples to apples! Good luck, Jim
  15. Thanks to all for the responses . I have been able to log in using a windows based tablet, I was using a older iPad before. Found the the timer was set on 30 min instead of the 2 hours that I had set before. Must have defaulted to the 30 min setting at some time. Now using the timer set to shutdown at 1 hour and 59 min and restart 1 min later. All is well thanks again jim
×
×
  • Create New...