Jump to content

jimnina

Validated Members
  • Posts

    64
  • Joined

  • Last visited

About jimnina

  • Birthday 01/01/1957

Optional Fields

  • SKP#
    112346
  • Lifetime Member
    No

Profile Information

  • Gender
    Male
  • Location
    Temple Terrace Florida
  • Interests
    Camping
    Motorcycling
    Kayaking

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

jimnina's Achievements

Newbie

Newbie (1/14)

  1. We used vinyl planking when we replaced our carpet. We have a Class 'A' DP 39'. Our slide doesn't have rollers and the only issue we have had is the nylon block broke. That allowed the slide to drop more than it should have. We have a piece of nylon block we use under the edge of the slide until we can get the block repaired. If we had to do it over we would not install the floor to float as much as the say. Cold weather allows gaps to form:(.Other than that we are very happy,easy cleaning and worry free. It's been installed for about 4 years and took about 3 days to install.
  2. Our plans for Maine have been cancelled by the campgrounds and they have already sent refunds. The Governor has closed the campgrounds to all out of state campers. The campgrounds have told us they are not sure when they will be allowed to have out of staters.
  3. A few items to check: Fan belt is still attached to the water pump. Exhaust pipe dust clean out. Fuel line collapsing. When I serviced mine I did all of the maintenance recommended, with the exception of the fan belt.
  4. Another option if you stay at a hotel look at a parking area where you can back up against another vehicle, fence, building, or curb.
  5. Thanks Kirk, I'll have to wait until the weekend to get the model number from the fridge.
  6. So we started having a problem with our dometic fridge when we switch between LP, Shore, or Genny power. This started after we had a shorted out surge protector that pushed 160v through out the 120v circuits. The 5A fuse in the fridge did its job and popped. I found new 5A fuses and replaced the blown one on the circuit board. What I didn't do is determine what type of 5A fuse should I have searched for. As long as I switch the fridge off before switching power the fuse doesn't blow and the fridge cools like it should. I searched on line and couldn't find anything that might tell me if I should be using a slo blo fuse since I may just have a normal fuse. Any help would be appreciated.
×
×
  • Create New...